Canon LBP-1210 Service Manual page 81

E. Printing Environment Setting and Test Printing
1. Printing Environment Setting
The tables below show the printing environment that can be set from the CAPT dialog boxes.
Note: The values in bold are the default values at the time of shipment from the factory.
Page Setup tab
Setup item
Paper Size* Letter / A4 / B5 / Executive / Envelope DL / Envelope #10 /
Envelope C5 / Envelope Monarch / Index Card / Custom
Output Size Match Page Size / Letter / A4 / B5 / Executive / Envelope DL /
Envelope #10 / Envelope C5 / Envelope Monarch / Index Card / Custom
Copies
Orientation
Page Layout
Manual Scaling
Page Order 2 Pages per Sheet/Portrait
2 Pages per Sheet/Landscape
4, 8, 9 Pages per Sheet
Paper Type Plain Paper / Transparercies / Special Paper 1 / Special Paper 2
* Default value is Letter size for USA and A4 size for other countries.
Quality tab
Setup item
Resolution
Halftorning
Brightness
Contrast
Setup Value
1 ≤ X ≤ 999
Portrait / Landscape
1 Page per Sheet / 2 Pages per Sheet / 4 Pages per Sheet /
8 Pages per Sheet / 9 Pages per Sheet
10% ≤ 100 ≤ 200%
Left to Right / Right to Left
Top to Bottom / Bottom to Top
Across from Left / Down from Left /
Across from Right / Down from Right
Setup Value
600dpi / 300dpi
Pattern 1 / Pattern 2 / Smooth
-80% ≤ 0 ≤ 80%
-80% ≤ 0 ≤ 80%
Table 1-7-1
Overlay tab
Setup item
Overlay Placement
Position*
Size**
Unit***
* Default value is the center of the paper.
** Default value is that of file.
*** Default value is in Inch for USA and in Centimeter for other countries.
Custom Paper Size Dialog (for Windows 95 / 98 / Me only)
Setup item
Units*
Paper Sizes
* Default value is in Inches for USA and in Centimeters for other countries.
Setup Value
Background / Foreground
Left 0 < X < 42.00cm
Top 0 < X < 42.00cm
Width 0 < X < 42.00cm
Height 0 < X < 42.00cm
Centimeters / Inches
Setup Value
Centimeters / Inches
7.62cm ≤ 21.0 ≤ 21.59cm
Width
12.7cm ≤ 29.7 ≤ 35.56cm
Height
CHAPTER 1
1 - 73