CHAPTER 1
N Port Setting Dialog Box
The Port Setting dialog box sets the port(s). The Port Setting dialog box can be opened by select-
ing the Port Setting command in the Option menu of the Status Window.
It can be opened only when the printer is connected to the local parallel port.
The Port Setting dialog box is shown in Figure 1-7-30.
(1)
(1) Port Setting : Sets the port(s).
(2) OK : Stores the settings and closes the dialog box.
(3) Cancel : Closes the dialog box without changing its items.
1 - 46
Port Setting:
Port Setting:
Standard
ECP without DMA
ECP with DMA
Figure 1-7-30
X
OK
Cancel
(2)
(3)