Canon LBP-1210 Service Manual page 61

G Connecting to a Network Printer
When used on a network as a network printer, the printer is linked to the computer designated
as a network print server and is shared by clients on the network.
This section will describe the installation of CAPT on a client computer.
For details, refer to the User's Manual packed with the printer.
Note: Precondition for the installation
• CAPT should be installed properly in the network print server to which the client
computer is to be connected, and the printer should be designated as a shared print-
er. See Page 1-25 for information on how to designate the printer as a shared print-
er.
• The network print server must be accessible to the client computer via the network.
• For the local installation, some functions are not available depending on the group to
which the client belongs. The network installation, on the other hand, has no limits
in functions even if the client logs into the network print server with any privilege.
For this printer, however, it is recommended that the network installation be imple-
mented with the Administrators privilege.
1. Switch on the client computer to start up Microsoft Windows 2000/XP and log in.
2. Use one of the following methods to start up the Add Printer Wizard.
• Start button / Settings / Printers / Printers folder / Open Add Printer.
• My Computer / Printers folder / Open Add Printer.
• Explorer / Desktop / My Computer / Printers / Open Add Printer.
3. Add Printer Wizard (Local printer or Network printer)
Select either to use this printer, as a local printer or network printer. The following proce-
dures describe the installation for using the printer as a network printer by selecting
Network Printer. For using the printer as a local printer, see Page 1-51 for details.
4. Add Printer Wizard (Locate Your Printer)
Select the method to locate the printer. Note that the 'Connect to a printer on the Internet
or on your intranet' dialog box is not utilized for this printer.
5. Add Printer Wizard (Browse For Printer)
Double-click the network print server to which the printer is to be connected, and select the
printer. Click on the Next button to connect to the selected network printer. If the connec-
tion fails, the Connect to Printer alert box (Failure connection to the printer) will appear.
6. Add Printer Wizard (Default Printer)
Select whether the printer is to be used as a default printer.
7. Add Printer Wizard (Completing the Add Printer Wizard)
This window notifies that the computer has been successfully connected to the network print
server. Clicking on the Finish button will finish Add Printer Wizard.
CHAPTER 1
1 - 53