Canon LBP-1210 Service Manual page 26

CHAPTER 1
The Property dialog consists of tabs based on the Microsoft Windows NT User Interface model.
The Property consists of the following two types of tabs:
• Common tabs used in all the Property; General, Details, and Sharing
• Specified tabs used only in the printer driver; Page Setup, Finishing and Quality
To open a tab and set the items in the tab, you can click on the tab or move the focus and
then press right or left cursor.
(1)
Canon LASER SHOT LBP-1210 Properties
General
Ports
Canon LASER SHOT LBP-1210
(1) General : Sets the entire printer-driver- related items.
(2) Ports : Selects the port to which the printer is connected.
(3) Scheduling : Sets print schedule.
(4) Sharing : Designates whether the printer is shared.
(5) Security : Sets the security for the printer.
(6) Select Forms : Sets user defined paper.
To store the items set in each of the tabs, click the OK button and close the Properties dialog
box. Or, to close the box without storing the items, click the Cancel button.
(1) OK : Changes the items in this dialog box and closes the box.
(2) Cancel : Closes this dialog box without changing its items.
The following sections will describe the details of the tabs.
1 - 18
(2) (3) (4) (5)
Scheduling Sharing Security
Figure 1-7-2
Figure 1-7-3
(6)
Select Forms
OK
(1)
? X
Cancel
(2)