Pick-Up Unit - Canon LBP-1210 Service Manual

CHAPTER 3
B. Pick-up Unit
1) Remove the engine controller unit (page
3-23; 1-8).
2) Remove the fixing unit (page 3-9; 1-2).
3) Remove the air intake fan and the pick-
up solenoid.
4) Remove the screw and the right corner
cover.
5) Remove the two screws and the lever
holder.
➀
➁
➃
➀ Screw ➁ Right corner cover
➂ Screws ➃ Lever holder
Figure 3-3-4
6) Unhook the claw and remove the gear
unit from outside.
➀
➀ Claw ➁ Gear unit
Figure 3-3-5
3 - 8
7) Remove the two TP screws and the
three tapping screws.
➁
➀ TP screws
➂
➁
➁ Tapping screws
Figure 3-3-6
➀