Canon LBP-1210 Service Manual page 59

b. Installation Procedures
G Connecting as a Local Printer
This section describes how to install CAPT for using this printer as a local printer. Install it by
following the procedures below.
For details, see the User's Manual packed with this printer.
1. Switch on the computer to which the printer is connected to start up Microsoft Windows
2000/XP.
2. Log in as Administrator.
3. Perform one of the following methods to start up Add Printer Wizard.
• Start button /Settings / Printers / Printers folder / Open Add Printer.
• My Computer / Control Panel / Printers folder / Open Add Printer.
• Explorer / Desktop / My Computer / Control Panel / Printers / Open Add Printer.
4. Add Printer Wizard (Local or network printer)
Select either the printer is to be used as a local printer or network printer. The following pro-
cedures describe the installation for using the printer as a local printer by selecting Local
Printer. For using the printer as a network printer, see Page 1-53 for details.
5. Add Printer Wizard (Selecting the Port)
Select the port to which the printer is connected. If the port is not available, click the 'Create
a new port' check box.
6. Add Printer Wizard (Selecting the Printer 1)
Insert the CD-ROM into the computer, and click on the Have Disk button to open the Install
From Disk screen.
Enter the name of the CD-ROM drive to the 'Copy manufacture's files from:' text box, and
click Browse.
Select Cap1setn.inf and click OK.
7. Add Printer Wizard (Selecting the Printer 2)
When the name of this printer appears in the Printers list box, and the printer you are
installing is selected, click the Next button. If you want to change the printer, click on the
Have Disk button to reselect the INF file.
8. Add Printer Wizard (Selecting Overwriting)
This window appears only when the same driver has already been installed. Select whether
or not the existing driver is to be overwritten by a newly installed driver
9. Add Printer Wizard (Printer name change)
Enter the name of this printer to the Printer Name text box. Select whether or not the print-
er is to be a default printer.
10. Add Printer Wizard (Selecting Do not share this printer/Share as:)
Select whether or not the computer is to be designated as a print server and the printer is
to be shared by other client computers on a network. You can change this setting after
installing CAPT.
11. Add Printer Wizard (Location and comments)
This window appears only when Share as: has been selected in Add Printer Wizard (Selecting
Do not share this printer/Share as:) selection box. You can specify the location of the print-
er and write comments.
12. Add Printer Wizard (Selecting Printing a Test Page)
Select whether or not the printer is to print a test page after you have finished installing
CAPT.
13. Add Printer Wizard (Confirming)
This window lists up the settings you have done. If the settings are correct, click on the
Finish button.
14. Coping Files...
When the installation begins, the Coping Files... dialog box appears.
CHAPTER 1
1 - 51