Canon LBP-1210 Service Manual page 146

CHAPTER 3
5) Remove the screw with washer.
6) Remove the two TP screws and the
plate.
7) Remove the tapping screw.
➁
➀ Screw with washe
➁ TP screws
➂ Plate
➃ Tapping screw
Figure 3-3-10
<Note for disassembling>
When the screw is not removable due to the
position of the gear, rotate the gear in the
direction of the arrow first and then remove
the screw.
➁
➀ Gear ➁ Screw
Figure 3-3-11
3 - 10
8) Remove the screw with washer.
9) Remove the two TP screws and the
plate.
10) Remove the tapping screw.
➀
➂
➂
➃
➃
➀ Screw with washer
➁ TP screws
➂ Plate
➃ Tapping screw
11) Disconnect the five connectors.
➀
➀ Connectors
➀
➁
Figure 3-3-12
➀
Figure 3-3-13
➀