Canon LBP-1210 Service Manual page 73

The Property dialog consists of tabs based on the Microsoft Windows 95/98/Me user inter-
face model.
The Property consists of the following two types of tabs:
• Common tabs used in all the Property; General, Details, and Sharing
• Specified tabs used only in the printer driver; Page Setup, Finishing and Quality
To open a tab and set the items in the tab, you can click on the tab or move the focus and
then press right or left cursor.
(1)
(2)
Canon LASER SHOT LBP-1210 Properties
General Details
(1) General : Sets the Page separator output and executes a test print.
(2) Details : Sets the printer port, printer driver and time out.
(3) Sharing : Sets the sharing of the printer.
(4) Page Setup : Sets items frequently used in general printing.
(5) Finishing : Selects whether or not to perform printing in collate.
(6) Quality : Sets items for the image.
To store the items set in each tab, click the OK button and close the Properties dialog box. To
close the box without changing the items, click the Cancel button.
(1) OK : Stores the items in this dialog box and closes the box.
(2) Cancel : Closes this dialog box without changing its items.
(3) Apply : Stores the items and continues the Property dialog.
Note: The tab and button names may differ depending on the OS.
Properties dialog box of Windows 95 shown in Figure 1-7-38, for example, is referred to
as "Details", however, it is displayed with "General" in Windows 2000.
Details of each tab are described below. For the operation and displays of the common tabs
(General, Details, and Sharing), see the Microsoft Windows 95/98/Me User's Guide.
(3) (4) (5)
Sharing Page Setup Finishing Quality
Figure 1-7-38
Figure 1-7-39
(6)
OK Cancel Apply
(1) (2)
(3)
The first tab in the
CHAPTER 1
? X
1 - 65