Installation; Outline; Selecting A Location - Canon LBP-1210 Service Manual

V. INSTALLATION
A. Outline
The printer is packaged and shipped from the factory after careful adjustments and strict
inspections.
To ensure that it performs is intended, it is very important to install the printer it properly.
The service engineer should have a complete knowledge of the printer, choose an appropriate
location, install the printer according to the proper procedure, and conduct sufficient checks of
the printer.
B. Selecting a Location
Place printer in a location where the following conditions are met. The service engineer should
inspect the customer's premises before installing the printer.
1. Power supply
Use the power supplies that satisfy the following conditions:
• Line voltage (AC): Within ±10 % of rated voltage
• Power frequency: 50/60 Hz ±2 Hz
2. Operating environment
Place the printer in a location where the following conditions are met:
• Level, flat surface
• Temperature, humidity within the following ranges
Surrounding temperature:
Surrounding humidity:
• Cool, well-ventilated space
Avoid placing the printer in the following locations:
• Places exposed to direct sunlight
If unavoidable, hang heavy curtains to shut out the direct sunlight.
• Near magnets or devices that emit a magnetic field
• Subject to vibration
• Dusty places
• Near fire or water
• Room with ultrasound humidifier
10 - 32.5 ˚C
20 - 80 %RH
CHAPTER 1
1 - 7