Canon LBP-1210 Service Manual page 70

CHAPTER 1
b. Installation Procedures
G Connecting the printer as a local server
This section describes how to install CAPT for using the printer as a local printer. Install it to
the computer by following the procedures below.
For details, see the User's Manual packed with this printer.
1. Switch on the computer to which the printer is connected to start up Microsoft Windows
95/98/Me.
2. Perform one of the following methods to start up the Add Printer Wizard.
• Start button /Settings / Printers / Printers folder / Open Add Printer.
• My Computer / Printers folder / Open Add Printer.
• Explorer / Desktop / My Computer / Printers / Open Add Printer.
3. Add Printer Wizard (Selecting Local or Network)
Select either to use this printer, as a local printer or network printer. The following proce-
dures describe the installation for using the printer as a local printer by selecting the Local
Printer. For using the printer as a network printer, see Page 1-63 for details.
4. Add Printer Wizard (Selecting the Printer1)
Insert the CD-ROM into the computer, and click on the Have Disk button to open the Install
From Disk screen.
Enter the name of the CD-ROM drive to the 'Copy manufacture's files from:' text box, and
click the Browse button.
5. Add Printer Wizard (Selecting the Printer 2)
When the name of this printer appears in the Printers list box, confirm that it is selected,
and then click the Next button. When you want to change the printer to be installed, click
the Have Disk button to reselect the INF file.
6. Add Printer Wizard (Selecting Overwriting)
This window appears only when the same driver has already been installed. Select whether
or not the existing driver is to be overwritten by a newly installed driver.
7. Add Printer Wizard (Selecting the port)
Select the port to which the printer is connected.
Click on the Configure Port button to open the Configure LPT Port dialog box, and check the
Spool MS-DOS print jobs check box.
8. Add Printer Wizard (Changing the Printer Name)
Enter the name of this printer to the Printer Name text box. Select whether or not the print-
er is to be a default printer.
9. Add Printer Wizard (Selecting Printing a Test Page)
Select whether or not to print a test page after you have finished installing CAPT.
10. Coping Files...
When the installation begins, the 'Coping Files...' dialog box appears.
11. End of installation
Click on the OK button to finish the installation. If you have selected to print a test page
after installation, confirm that the installation has completed by printing a test page.
1 - 62