Technical Features - Pavone Systems DAT 1400 Technical Manual

Power supply
Max. absorption
Isolation
Installation category
Operating temperature
Storage temperature
Weight display
Led
Keyboard
Overall dimensions
Assembly
Container material
Connections
Load cells power supply
Input sensitivity
Linearity
Temperature drift
Internal resolution
Displayed weight resolution
Measuring range
Weight acquisition frequency
Digital filter
Weight decimal number
Zero calibration and full scale
Logic outputs
Logic inputs
Serial port (n° 2)
Maximum cable length
Serial protocols
Baud rate
USB port device:
Analogue output (optional)
Analogue output calibration
Linearity
Thermal drift
Microcontroller:
Data storage
Fieldbus (alternative to RS485)
Regulatory Compliance

TECHNICAL FEATURES

12 ÷ 24 Vdc ± 15 %
5 W
Class II
Cat. II
-10°C ÷ +50°C (max humidity 85% without
condensate)
-20°C ÷ +70°C
6 digit 7-segment red LEDs (h 14 mm)
4 3mm indicator LEDs
4 keys
106 mm x 63 mm x 110 mm (l x h x d)
On support for DIN profile or OMEGA bar
Self-extinguishing Noryl (UL 94 V1)
Removable terminal boards pitch 5.08.
5 Vcc/120 mA (max 8 cells x 350Ω in parallel) short-
circuit protected
0.02 μV min.
< 0.01% of full scale
< 0.001% of full scale / C°
24 bit
Up to 999,999 divisions on useful capacity
From –3,9 mV/V to +3,9 mV/V
12 Hz - 1000 Hz
Selectable 0,5 ÷50 Hz (up to 1000 Hz in manual)
from 0 to 4 decimal digits
Automatic (theoretical) or executable from the
keyboard.
2 optoinsulated (free contact) max 24Vdc / 100 mA
ea.
2 optoinsulated 24 Vdc PNP (external power supply)
RS232C and RS422/485
15m (RS232C) and 1000m (RS422 and RS485)
ASCII, Modbus RTU
1200, 2400, 4800, 9600, 19200, 38400, 57600,
115200 selectable
complies with USB 2.0; up to 12 Mbps speed
optoinsulated 16 Bit
Voltage: 0÷5/10 V (R min10 K Ohm),
Current: 0/4÷20 mA (R max 300 Ohm)
From keyboard
< 0,02% FS
0,001% FS / °C
ARM Cortex M0+ to 32 bit, 256KB Flash
reprogrammable on-board by USB.
64 Kbytes expandable up to 1024 Kbytes
PROFINET, ETHERNET IP, ETHERCAT, ETHERNET,
PROFIBUS, CANOPEN
EN61000-6-2, EN61000-6-3 , EN61010-1,
EN61326-1, EN45501
Page 5