Fronius Primo GEN24 3.0 Plus Operating Instructions Manual page 117

FAC inner Test to check the minimum frequency
limit min
FAC altern- Test to check the maximum alternative frequency
ativ inner
limit max
FAC altern- Test to check the minimum alternative frequency
ativ inner
limit min
VAC outer Test to check the minimum voltage in the phases
limit min
VAC long Test to check the 10 min average voltage in the phases
time limit
Save as PDF
Click the 'Save as PDF' button.
1
Enter the file name in the input field and click on the 'Print' button.
2
The PDF is created and displayed.
Note on autotest
The limit values are set in the menu area 'Grid Code'.
The access code for the 'Grid Code' menu area corresponds to the installer code (PROFI
menu) and is only made available to Fronius following a written request. An appropriate
application form is available from national technical support.
117