Advertisement
Ice-making parts cleaning
During use, periodically clean these main systems of your icemaker.
1.
Repeat above steps to clean the water tank and other inner parts of the unit.
2.
Pay special attention to the water dividing pipe on the evaporator. If there is no
water flowing out from the water dividing pipe or the water flow is very weak,
remove this water dividing pipe to clean carefully. Clean each small hole on the
water dividing pipe as displayed in the following illustration, ensuring each hole is
unobstructed, then reinstall to its original location.
3.
The length of the cleaning period will depend on the quality of the water used. The
more frequently the water tank is drained, the longer unit and its water pump can
operate for.
4.
When there are ice cubes on the surface of the evaporator that will not fall off
easily, do not use a mechanical apparatus to remove it by force. Press and hold the
"On/Off" button for more than 5 seconds, and the unit will enter the ice melting
process. After some time, the larger ice cubes will fall; turn off the unit and unplug
the power cord to clean the surface of the evaporator.
Advertisement
