Advertisement
OPERATION
Water connection
Important: Be sure to use the new hose-sets supplied with the appliance to connect to water
mains. Old hose-sets should not be reused.
1.
Connect the water drainage pipe
Pull out the black water drainage cap (indicated as "A" in the diagram below), then
connect the included white drainage pipe. Connect the other end of the drainage pipe
to the main water drainage pipeline. Make sure not to set the drainage pipe too high.
2.
Connect the water supply hose to the unit
Step 1: Remove the clipper on the main water supply inlet port (indicated as "B" in the
diagram below) located at the rear of the unit. Push the anti-dust plug inwards to pop it
out, then pull it out to remove.
Step 2: Insert the one end of the white water supply hose into the water inlet port and
push inward completely. Reinstall the clipper to lock the water supply hose in place.
Unit back view
Main water supply inlet
Water drainage cap
Remove the clipper
Press in the centre
to pop out and
remove the anti-dust
plug
Reinstall the clipper
after inserting the
hose
Insert the water
supply hose
completely
Advertisement
