Advertisement
The ice-making process
Step 1: Standby state
Step 6: During ice-
harvest, the water-
flowing process finishes
to start making ice-
cubes again.
1.
After connecting the main water supplying hose with the unit, plug in the main
power supply plug. Press the "On/Off" button on the control panel to begin the ice
making cycle. The power symbol will remain lit, the left number in the LCD window
will display the present ambient temperature, the right number will display the
present ice-making setting and the ice cube symbol rotates. When the left number
beings flashing, the number signifies the countdown time to complete one ice
making cycle.
2.
Each ice making cycle will last about 11 to 20 minutes, depending on the ambient
temperature and the water temperature. During the first use, according to the
initial water temperature, the ice-making time may be slightly extended.
3.
When the ice-making process is over, the machine switches to ice-harvest process.
During the ice-harvest process, the ice cube symbol changes from rotating to
flashing, and the arrow on the manual filling water symbol will start to flash. Water
will flow into the water tank again until the floating ball of the water level switch
rises to the highest position, at which point the water stops flowing and the manual
filling water symbol will disappear.
When the ice-harvest finishes, the ice-full detecting plate will rotate downward
once, then return to the original position to begin the next ice-making process.
If the ice-full detecting plate is jammed and cannot return to the original position,
the ice storage bin is full of ice cubes and the ice-making process will stop
automatically.
4.
When the "Ice-full" symbol is illuminated, the unit stops running. If the ice
compartment is emptied, the unit will start to make ice cubes again after the
compressor has run for another 3 minutes.
5.
During the ice-making process, press the "+" or "-" button to adjust the ice-making
process duration period length and the thickness of the ice accordingly. Press the
Step 2: The arrow
Press
flashes to show
ON/OFF
water flow
button to
turn on
the unit
Step 5: Ice-harvest starts
and ice-cube symbol
flashes. The arrow flashes
to show water flow into the
water tank.
Step 3: Start to
make ice and ice-
cube symbol rotates
Step 4: Display the
countdown time of
the ice-making
process.
Advertisement
