Advertisement
When the unit is plugged in, press the "Light" button on the operation panel once to turn on
the LED light inside the ice bin, and the light symbol on the LCD display window will
illuminate. Press this button once again, the LED light and the light symbol will both turn off.
Note:
Press and hold the "Light" button for more than 5 seconds to change the ambient
temperature display between degrees Centigrade and degrees Fahrenheit (°C and °F).
Error codes
If the unit malfunctions, an error code will display in the left side of LCD display window.
E1 means the ambient temperature sensor has malfunctioned.
E2 means that the ice-making program is abnormal, including excessively large ice cubes,
no ice falling off or ice not being produced, etc.
Note:
During the ice cube making process, press the "On/off" button for more than 5
seconds and the unit will jump into the ice-harvest process. After the ice harvest
process is completed, the unit will return to the ice-making process.
Advertisement
