Advertisement
INSTALLATION
a.
This unit is not for outdoor use. Keep to the proper room temperature and inlet
water temperature according under "Specifications" below, or the ice making
performance will be affected.
b.
This unit should not be located near heat sources such as ovens or radiators.
c.
The unit should be located on a firm and level foundation at normal countertop
height.
d.
There must be at least 15cm clearance at the rear side for connection and 20cm
clearance in front to open the door and provide good air circulation.
e.
Do not put anything on the top of the ice maker.
Installation Clearance:
To ensure proper ventilation for the appliance, the front of the unit must be completely
unobstructed (at least 20cm free space). Allow at least 15cm clearance at the rear and 5cm
at the top and sides for proper air circulation. The installation should allow the ice maker to
be pulled forward for servicing if necessary.
When installing the ice maker under a counter, follow the recommended spacing
dimensions shown above. Place electrical and drain fixtures in the recommended locations
as shown.
Choose a well-ventilated area with temperatures above 10°C and below 32°C. This unit
must be installed in an area protected from the elements, such as wind, rain, and water
sprays or drips.
The ice maker requires a continuous main water supply with pressure 1-8 Bar as required
under "Specifications" below. The temperature of the water feeding into the ice maker
should be between 5°C and 25°C for proper operation.
Top view (mm)
Side view (mm)
Advertisement
