Memory Allocation Modification - Emerson QuickPanel IC755C S06RD Series User Manual

User Manual
GFK-2847Y
CAUTION
Setting the Program Memory too low may prevent additional applications from starting, or
may cause currently running applications to fail due to lack of memory.
Setting the Storage Memory too low may prevent the saving of files into the object store
portion of the file system, which may also cause application failures.
For the QuickPanel
limit may cause the device to become unresponsive. The device may be unable to launch
any applications or windows and it may also require a power cycle. It is recommended that
the Storage Memory be set to a valid limit.
6.5.2

Memory Allocation Modification

To change the memory allocation
1.
2.
Figure 85: System Memory Slide Bar Display
Note:
3.
4.
Operation
+ 6" display unit, setting the Storage Memory too high or to an extreme
From the Control Panel, double-tap System to display the System Properties
window.
From the Memory tab, drag the slider bar to divide into Storage and Program
memory. The amount of memory allocated to and used by each area is displayed in
the window. The blue slider bar indicates the current amount of unallocated SDRAM
and determines the boundaries within which the slider can move.
Storage memory is limited to a maximum of 128 MB. Using the slide bar to increase storage
memory will provide more RAM-based storage in the folder \Object Store.
Tap OK to apply the new setting.
Run the Backup Utility to save the settings.
Chapter 6
Aug 2020
76