Establish Snmp Communication - Emerson QuickPanel IC755C S06RD Series User Manual

User Manual
GFK-2847Y
type in SNMP as listed in the following table. To verify this, review the Sequence of HMI
Tags object in the MIB file.
PAC Machine Edition VIEW Data Types SNMP Data Types
BOOL
DINT
LREAL
STRING
Note:
You can continue to use the data type override/suffix mechanism in PAC Machine Edition
for the LREAL data type to represent a INT/DINT if you have configured the data type for
driver variables. This enables you to map to the DISPLAYSTRING data type in the SNMP
communication as well.
For example, for the Emerson SRTP driver, you can override the IO Address of LREAL variable
LREALVar data type as %R100 [INT]. This maps LREALVar to DISPLAYSTRING in the MIB file.
3.14.6

Establish SNMP Communication

NOTICE
•
To establish SNMP communication with the QuickPanel
1.
2.
3.
4.
5.
The SNMP Manager communicating with QuickPanel
and receive Alarms/Trap notification from the QuickPanel
Agent.
Software
The PAC Machine Edition VIEW LREAL data type is mapped to DISPLAYSTRING to retain the
data intact.
SNMP communication requires that both the QuickPanel
Manager running on a machine are connected on a valid Ethernet network.
Download the Project to the network connected QuickPanel
Runtime.
Configure the Trap Destinations with the IP Address of the SNMP Manager.
Note:
If you do not want to be notified of Traps, you do not need to configure Trap
Destinations.
Enable a SNMP Agent.
Export the MIB to a SD Card.
Auto-discover or connect the QuickPanel
Once connected, load the MIB to the SNMP Manager tool.
INTEGER
INTEGER
DISPLAYSTRING
DISPLAYSTRING
+
device and the SNMP
+ device
+ SNMP Agent from the SNMP Manager.
+ device can query values for HMI Tags
+ device operating as an SNMP
Chapter 3
Aug 2020
+ device and start
41