User Manual
GFK-2847Y
3.14.3
Export MIB to SD Card
With the SNMP Agent is enabled on the QuickPanel
Management Information Base (MIB) QuickPanelMIB.mib file to an SD Card.
NOTICE
•
•
To export the MIB to an SD Card
1.
2.
3.
Figure 41: Copy MIB to SD Card
A dialog box displays when the copy is successful or if a failure occurs.
Software
It is highly recommended that you pre-load Emerson MIBs (GEIP-SMI.txt and GEIP-
PRODUCTS-MIB.txt in sequence) prior to loading the QuickPanelMIB.mib file into
SNMP Managers to avoid any MIB compiler errors.
Download the MIBs GEIP-SMI.txt and GEIP-PRODUCTS-MIB.txt from the Support Site.
QuickPanelMIB.mib may be copied from the QuickPanel
following procedure.
Insert a working SD Card into the external card slot on the QuickPanel
From the Start menu, select System, open the QuickPanel
the SNMP Agent tab.
Copy the MIB file to the SD Card.
Chapter 3
Aug 2020
device, export the QuickPanel
+
device by performing the
+
device.
+
Setup Tool, and select
+
+
39