Configuring The Video Encoder Axis Q7404; Connecting The Video Encoder Axis Q7404 - Magna BLUEPIRAT Series Camera User Manual

9 Configuring the Video Encoder AXIS Q7404

9.1

Connecting the Video Encoder AXIS Q7404

Connect the required cameras with the Video Encoder. The BNC connectors of the Video En-
coder are numbered. Always start with the first connector.
Connect the power supply to the Video Encoder. Connect your PC or laptop via Ethernet cable
to the Video Encoder. Turn on the power supply. All LEDs should light green after about 60 sec-
onds.
Cameras
Figure 9.1: AXIS Q7404
Change your PCs IP configuration. Use static IP address with the following settings:
Figure 9.2: Setting a static IP address
BLUEPIRAT SERIES | CAMERA USER GUIDE/
AXIS Q7404
page 55 of 93
Power supply (acc. AXIS
spec.)
PC / laptop
Index