Encrypting Video Data; Setting The Video Server - Magna BLUEPIRAT Series Camera User Manual

Figure 14.5: Camera => General settings
To record video blocks of certain length, type in your desired value in seconds at <Video block
length>.
The field <Synchronisation of the camera time with the data logger time every [ ] s> al-
lows defining his time range.
Note:
If there are some gaps in the recording it may be caused by this synchronisation. In this
case please deactivate the synchronization by inserting *0* into the field.
If you use more than one single camera like Axis 207/210/211 the synchonisation must be ena-
bled to guarantee a synchronised recording of all cameras.
14.2.1.1

Encrypting video data

If the video data should be encrypted, the Client offers the possibility to set, change or delete a
password in this field:
14.2.1.2

Setting the video server

In the dropdown menu at <Video Servers> select the connected network camera / Video En-
coder. The following options are available:
Option 1: No video server / video server with 4 IPs
AXIS Q7404 / 207 / 210 / 211 / P12 series / F41
Option 2: Video server with one IP and 4 channels
AXIS P7214 / F44
Option 3: Video server with one IP and one *quad* channel
AXIS P7214 / F44
BLUEPIRAT SERIES | CAMERA USER GUIDE/
page 79 of 93