Audio Settings (Fw 2.0.1 Onwards); Adjusting Audio Source - Magna BLUEPIRAT Series Camera User Manual

BLUEPIRAT SERIES | CAMERA USER GUIDE/
page 32 of 93
6.5

Audio settings (FW 2.0.1 onwards)

Change to [Basic Setup]  [4 Video Stream] and switch to the tab [Audio]. Activate the
checkbox Enable audio to enable the general audio functionality.
Note:
Using the AXIS F44 these settings must be made for Camera 1 to 4.
[Basic Setup]  [4 Video Stream]  [Camera ...]
Figure 6.14: Enable audio

6.5.1 Adjusting audio source

Change to the entry [Video & Audio]  [Audio Settings]. Here you can configure the con-
nected source as well as the recorded audio quality.
Figure 6.15: Configure audio settings