Downloading Video Data - Magna BLUEPIRAT Series Camera User Manual

BLUEPIRAT SERIES | CAMERA USER GUIDE/
page 83 of 93

15 Downloading video data

The System Client application allows downloading and saving the recorded data as offline data
set from the logger on the computers disk to use it later or to convert the data directly from the
logger. (see chapter 16)
Download and conversion of data is explained in detail in the System Client User Guide. This
manual you can find in the ServiceCenter of MAGNA Telemotive GmbH or directly under this
link:
https://sc.telemotive.de/4/uploads/media/TelemotiveSystemClient_UserManual.pdf
While all of the other trace files are recorded in the Telemotive format from the logger, video sig-
nals are directly provided as MPEG4 stream from the camera and saved as it is on the logger.
For the video application, there is a special characteristic about the video block length. If you
select a time period or a marker for download, so the downloaded data does not match exactly
to the expected start- and end time. The reason is that the video block length of 60 seconds
does not match exactly to the selected download time. The system always downloads complete
video blocks. The downloaded video is in all cases longer than selected. It starts earlier and
ends later than the selected period. But the selected time is always included.
Index