Configuring The Network Camera Axis F41/F44; Connecting The Network Camera Axis F41/F44 - Magna BLUEPIRAT Series Camera User Manual

6 Configuring the network camera AXIS F41/F44

6.1

Connecting the network camera AXIS F41/F44

Connect the camera with the associated main unit. Connect the power supply to the main unit.
Connect your PC or laptop via Ethernet cable to the main unit. Turn on the power supply. All
LEDs should light green after about 60 seconds.
Network camera AXIS F41
Power supply (acc. AXIS
spec.)
Figure 6.1: Connecting the network camera with a PC/ laptop
Change your PCs IP configuration. Use static IP address with the following settings:
Figure 6.2: Setting a static IP address
BLUEPIRAT SERIES | CAMERA USER GUIDE/
page 25 of 93
PC / laptop
Index