Configuring The Video Encoder Axis Q7404; Connecting The Video Encoder Axis Q7404 - Magna Telemotive blue PiraT2 User Manual

8

Configuring the Video Encoder AXIS Q7404

8.1

Connecting the Video Encoder AXIS Q7404

Connect the required cameras with the Video Encoder. The BNC connectors of the Video En-
coder are numbered. Always start with the first connector.
Connect the power supply to the Video Encoder. Connect your PC or laptop via Ethernet cable
to the Video Encoder. Turn on the power supply. All LEDs should light green after about 60
seconds.
Cameras
Figure 8.1: AXIS Q7404
Change your PCs IP configuration. Use static IP address with the following settings:
Figure 8.2: Setting a static IP address
bP2-Mini_Camera_UserGuide_V2.4.1.doc
blue PiraT2 / 5E / Mini
Camera User Guide
AXIS Q7404
Datum: 16.09.2016
Seite 42 von 77
Power supply (acc. AXIS
spec.)
PC / laptop
Index