Configuring The Network Camera Axis F54; Connecting The Network Camera Axis F54 - Magna BLUEPIRAT Series Camera User Manual

5 Configuring the network camera AXIS F54

More information about AXIS FA54 Main Unit you can also be found at:
https://www.axis.com/de-de/products/online-manual/32947
The following settings were made with AXIS firmware 10.0.2.
5.1

Connecting the network camera AXIS F54

Connect the camera with the associated main unit. Connect the power supply to the main unit.
Connect your PC or laptop via Ethernet cable to the main unit. Turn on the power supply. All
three LEDs should light green after about 60 seconds.
Power supply (acc.
AXIS-Spec.)
Figure 5.1 Connecting the network camera with a PC/ laptop
Change your PCs IP configuration. Use static IP address with the following settings:
Figure 5.2 Setting a static IP address
BLUEPIRAT SERIES | CAMERA USER GUIDE/
page 12 of 93
PC / Laptop