Ip Configuration - Magna BLUEPIRAT Series Camera User Manual

6.6

IP configuration

Change to the entry [Basic Setup]  [2 TCP/IP]. Choose the <IPv4 Address Configuration>
(o) Use the following IP address. Type in these data:
Figure 6.19: Setting an IP address
Confirm the settings with [Save].
Note:
By changing the IP address you lose the connection to the network camera.
This also will be told to you in an information window:
Figure 6.20: Hint 1
Figure 6.21: Hint 2
For reconnecting you have to change your computers IP address to 192.168.1.80. Then type in
your browser the new IP address of the network camera, to access the configuration again.
Note:
Finally, change your PCs or laptops IP configuration back to dynamic configuration.
BLUEPIRAT SERIES | CAMERA USER GUIDE/
IP address: 192.168.1.90
Subnet mask: 255.255.255.0
page 34 of 93
Index