Creating The User "Admin - Magna BLUEPIRAT Series Camera User Manual

Figure 8.9: Hint 2
For reconnecting you have to change your computers IP address to 192.168.1.80. Then type in
your browser the new IP address of the network camera, to access the configuration again.
Note:
Finally, change your PCs or laptops IP configuration back to dynamic configuration.

8.3.3 Creating the user "admin"

For communicating with the data logger a special user is needed with administrator rights.
Click [Setup]  [Basic Configuration]  [1. Users]  [Add...].
A new window is opened.
Name the new user "admin" and define a password. This user and password will be needed
later too.
Recommended:
User name: admin
Password: 2x8bg4
Choose the <User group> (o) Administrator and click [OK].
Activate at <User Settings> the checkbox Enable anonymous viewer login (no user name or
password required). Confirm the settings with [Save].
Note:
If you want to use an individual password for the camera, you have to deactivate this
checkbox. Now you can change the password for the user "admin" individually.
This password has also to be configured in the client.
BLUEPIRAT SERIES | CAMERA USER GUIDE/
page 50 of 93