Magna BLUEPIRAT Series Camera User Manual
  1. Manuals
  2. Brands
  3. Magna Manuals
  4. Digital Camera
  5. BLUEPIRAT Series
  6. Camera user manual

Magna BLUEPIRAT Series Camera User Manual

Hide thumbs Also See for BLUEPIRAT Series:
Table of Contents

Advertisement

Quick Links

Download this manual
BLUEPIRAT Series
Camera User Guide / 30.09.2020
Version 5.0.1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the BLUEPIRAT Series and is the answer not in the manual?

Questions and answers

Related Manuals for Magna BLUEPIRAT Series

Summary of Contents for Magna BLUEPIRAT Series

  • Page 1 BLUEPIRAT Series Camera User Guide / 30.09.2020 Version 5.0.1...

  • Page 2: Table Of Contents

    BLUEPIRAT SERIES | CAMERA USER GUIDE/ page 2 of 93 Table of contents 1 LICENSE AGREEMENT ..............4 2 PRODUCT LIABILITY ................5 2.1 Terms and Conditions of Sale and Delivery ............5 2.2 Important operating instructions ................ 5 3 Overview....................6 4 System requirements .................
  • Page 3 BLUEPIRAT SERIES | CAMERA USER GUIDE/ page 3 of 93 9 Configuring the Video Encoder AXIS Q7404 ........55 9.1 Connecting the Video Encoder AXIS Q7404 ..........55 9.2 Access to the Video Encoder AXIS Q7404 ............. 56 9.3 Creating the user “admin” ................58 9.4 Setting date and time ..................

  • Page 4: License Agreement

    Licensor is and remains the owner of all titles, rights and interests in the soft- ware. The software is a copyright property of the MAGNA Telemotive GmbH. The program or parts of it may not be further licensed to third parts, rented, sold or be further marketed in any form without explicit written ap- proval by MAGNA Telemotive GmbH.

  • Page 5: Product Liability

    BLUEPIRAT SERIES | CAMERA USER GUIDE/ page 5 of 93 2 PRODUCT LIABILITY Terms and Conditions of Sale and Delivery The General Terms and Conditions of Sale and Delivery of MAGNA Telemotive GmbH can be found on our website (https://telemotive.magna.com) under imprint. Important operating instructions...

  • Page 6: Overview

     BLUEPIRAT Remote of MAGNA Telemotive GmbH. The Video Encoders are used to connect analog cameras (NTSC/PAL). The network cameras can be connected directly to the data logger. The system allows the recording of up to four different video streams at the same time. For that the server (or a network camera) and the data logger must be connected to each other and con- figured separately by a HTML-based client.

  • Page 7: System Requirements

    BLUEPIRAT SERIES | CAMERA USER GUIDE/ page 7 of 93 4 System requirements Network camera AXIS P12 / F44 / F41 / 211 / 210 / 207 Network cameras have an Ethernet port and therefore can be connected directly to the data log- ger.

  • Page 8: Accessing A Connected Camera / Camera Server

    BLUEPIRAT SERIES | CAMERA USER GUIDE/ page 8 of 93 four GBit Ethernet ports, and much more. Different blue PiraT Mini can be expanded flexibly to one cluster and therefore handled very easily by using System Link. BLUEPIRAT2 The BLUEPIRAT2 is our top-class all-in-one data logger. Seven models cover a wide range of interfaces.

  • Page 9: Further Manuals

    BLUEPIRAT SERIES | CAMERA USER GUIDE/ page 9 of 93 Further manuals Beside this user Manual, we offer the main manuals for our System Client as well as for the dif- ferent data logger generations in our Service Center at https://sc.telemotive.de/bluepirat.

  • Page 10: Additional Features By Optional Licenses

    MOST150 synchronous/isochronous data MLBevo / QXDM The license Connected-Gateway MLBevo enables the recording of data of the ATOP control unit MLBevo via USB to the Magna Telemotive data log- ger and convert these data with the System Client. (from FW 02.03.01) Additional this license allows to log Qualcomm QXDM logs via USB (from FW 03.06.XX)

  • Page 11: Firmware Care

    BLUEPIRAT SERIES | CAMERA USER GUIDE/ page 11 of 93 Firmware Care MAGNA Telemotive GmbH invests a great amount in the further development of its products. For this we regularly provide new functions and enhancements via firmware and client releases. Basic conditions As part of the "...

  • Page 12: Configuring The Network Camera Axis F54

    BLUEPIRAT SERIES | CAMERA USER GUIDE/ page 12 of 93 5 Configuring the network camera AXIS F54 More information about AXIS FA54 Main Unit you can also be found at: https://www.axis.com/de-de/products/online-manual/32947 The following settings were made with AXIS firmware 10.0.2.

  • Page 13: Access To The Network Camera Axis Fa54

    BLUEPIRAT SERIES | CAMERA USER GUIDE/ page 13 of 93 Access to the network camera AXIS FA54 Open your Internet browser and enter the network camera's default IP address: 192.168.0.90. Please refer to the instructions from AXIS regarding browser support: https://www.axis.com/support/technical-notes/browser-support...
  • Page 14 BLUEPIRAT SERIES | CAMERA USER GUIDE/ page 14 of 93 Set IP address to 192.168.1.90 and set date and time manually Figure 5.5 Defining the IP address and setting the date and time Comment: The time set here is initially only a temporary adjustment. In our system the data logger is the time master and overwrites the logger time after successfully synchronizing with the video server.

  • Page 15: Creating The „Admin" User

    BLUEPIRAT SERIES | CAMERA USER GUIDE/ page 15 of 93 Creating the „admin“ user Now enter the IP address 192.168.1.90 in the browser: Enter the user name root and the password you entered before. Figure 5.6 Login to the Main Unit after changing the IP address...
  • Page 16 BLUEPIRAT SERIES | CAMERA USER GUIDE/ page 16 of 93 Important! Please enter as password 2x8bg4 admin Username Password 2x8bg4 Figure 5.8 Create new user Admin After entering the password click on [Save]. Now two users root and Admin should appear in the user menu.
  • Page 17 BLUEPIRAT SERIES | CAMERA USER GUIDE/ page 17 of 93 In the Anonymous Users field, move the slider to the right to allow anonymous users. Figure 5.10 Anonymous Users field and confirm the note by clicking the [Yes] button. Figure 5.11 Note Allow anonymous users...

  • Page 18: Further System Settings

    BLUEPIRAT SERIES | CAMERA USER GUIDE/ page 18 of 93 Further system settings 5.4.1 RTSP (Real-Time Streaming Protocol) Please check that the following setting is set: On the System tab, click on [Plain config]. Figure 5.12 Selection menu Click on the [Got it] button in the message that now appears Figure 5.13 Confirmation query Advanced settings...

  • Page 19: Displaying The Date And Time In The Video Image

    BLUEPIRAT SERIES | CAMERA USER GUIDE/ page 19 of 93 In the opened window scroll down almost completely to RTSP. The following settings should be made there: Figure 5.15 RTSP Menu 5.4.2 Displaying the date and time in the video image These settings must be made individually for each camera.
  • Page 20 BLUEPIRAT SERIES | CAMERA USER GUIDE/ page 20 of 93 Select [Create] from the Create Overlay menu Figure 5.19 Menu Overlay Click on the date and time to display them in the image. You can also set the desired formatting here.

  • Page 21: Stream Settings

    BLUEPIRAT SERIES | CAMERA USER GUIDE/ page 21 of 93 5.4.3 Stream settings Click on the [stream] tab. The following settings can be made here: Figure 5.21 Stream settings Note: In case that the video is stuttering or has breaks, please reduce the preset <Maximum...

  • Page 22: Audio Setting

    BLUEPIRAT SERIES | CAMERA USER GUIDE/ page 22 of 93 5.4.4 Audio setting To enable audio, select the [Audio] tab. Make the desired settings here. Figure 5.24 Audio settings menu Further settings can be made by selecting the audio source.

  • Page 23: System Maintenance

    BLUEPIRAT SERIES | CAMERA USER GUIDE/ page 23 of 93 System Maintenance For system maintenance please click on the menu item [System]. Click on the [Maintenance] icon there Figure 5.27 System menu Various system tasks can be performed in the System / Maintenance menu, including resetting to factory settings and an update or downgrade of the firmware.

  • Page 24: Reset To Factory Settings

    BLUEPIRAT SERIES | CAMERA USER GUIDE/ page 24 of 93 Figure 5.30 Firmware rollback Reset to factory settings In addition to the procedure described above, you can also reset the Main Unit to the factory settings as follows: 1. Disconnect power from the product.

  • Page 25: Configuring The Network Camera Axis F41/F44

    BLUEPIRAT SERIES | CAMERA USER GUIDE/ page 25 of 93 6 Configuring the network camera AXIS F41/F44 Connecting the network camera AXIS F41/F44 Connect the camera with the associated main unit. Connect the power supply to the main unit. Connect your PC or laptop via Ethernet cable to the main unit. Turn on the power supply. All LEDs should light green after about 60 seconds.

  • Page 26: Access To The Network Camera Axis F41/F44

    BLUEPIRAT SERIES | CAMERA USER GUIDE/ page 26 of 93 Access to the network camera AXIS F41/F44 Open your browser and type in the preset IP address of the network camera: 192.168.0.90. Choose your password and type it in. This password will be needed later.
  • Page 27 BLUEPIRAT SERIES | CAMERA USER GUIDE/ page 27 of 93 Thereafter you have to set the capture mode and the power line frequency of the power supply. In Europe 50 Hz is common. Figure 6.5: Configure the capture mode F41 Figure6.6: Configure the capture mode F44...
  • Page 28 BLUEPIRAT SERIES | CAMERA USER GUIDE/ page 28 of 93 Figure 6.8: Picture of a connected network camera Index...

  • Page 29: Creating The User "Admin

    BLUEPIRAT SERIES | CAMERA USER GUIDE/ page 29 of 93 Creating the user “admin” For communicating with the data logger a special user is needed with administrator rights. Click [Setup]  [Basic Setup]  [1 Users]  [Add…]. Figure 6.9: Adding a new user A new window is opened.

  • Page 30: Setting Date And Time

    BLUEPIRAT SERIES | CAMERA USER GUIDE/ page 30 of 93 Setting date and time Change to the entry [Basic Setup]  [3 Date & Time]. Choose the <Time mode> (o) Set man- ually. Set up date and time. Confirm the settings with [Save].
  • Page 31 BLUEPIRAT SERIES | CAMERA USER GUIDE/ page 31 of 93 [Basic Setup]  [4 Video Stream]  [Camera …] Figure 6.12: Settings for cameras 1 - 4 Figure 6.13: Include date and time in the video stream The setup for in the video image embedded timestamps is finished.

  • Page 32: Audio Settings (Fw 2.0.1 Onwards)

    BLUEPIRAT SERIES | CAMERA USER GUIDE/ page 32 of 93 Audio settings (FW 2.0.1 onwards) Change to [Basic Setup]  [4 Video Stream] and switch to the tab [Audio]. Activate the checkbox Enable audio to enable the general audio functionality.

  • Page 33: Adjusting Audio Quality

    BLUEPIRAT SERIES | CAMERA USER GUIDE/ page 33 of 93 In the dropdown box next to <Source> you can choose between [Line] for an audio source like an MP3 player and [Microphone]. Figure 6.16: Select audio input (Line) The source [Microphone] supports additionally the functionality to power a microphone.

  • Page 34: Ip Configuration

    BLUEPIRAT SERIES | CAMERA USER GUIDE/ page 34 of 93 IP configuration Change to the entry [Basic Setup]  [2 TCP/IP]. Choose the <IPv4 Address Configuration> (o) Use the following IP address. Type in these data: IP address: 192.168.1.90 Subnet mask: 255.255.255.0...

  • Page 35: Resetting Configuration

    BLUEPIRAT SERIES | CAMERA USER GUIDE/ page 35 of 93 Resetting configuration The camera AXIS F41/F44 can be set to default settings by the following steps: 1. Disconnect the connection to the power supply. 2. Press and hold the control button next to the SD slot and 3.

  • Page 36: Configuring The Network Camera Axis P12Xx

    BLUEPIRAT SERIES | CAMERA USER GUIDE/ page 36 of 93 7 Configuring the network camera AXIS P12xx Connecting the network camera AXIS P1204 / P1214 / P1224 Connect the camera with the associated main unit. Connect the power supply to the main unit.

  • Page 37: Access To The Network Camera Axis P12Xx

    BLUEPIRAT SERIES | CAMERA USER GUIDE/ page 37 of 93 Access to the network camera AXIS P12xx Open your browser and type in the preset IP address of the network camera: 192.168.0.90. (http://192.168.0.90) Choose your password and type it in. This password will be needed later.
  • Page 38 BLUEPIRAT SERIES | CAMERA USER GUIDE/ page 38 of 93 Thereafter you have to set the power line frequency of the power supply. In Europe 50 Hz is common. Figure 7.4: Configure the power line frequency Now you should see the live stream of the connected network camera.

  • Page 39: Creating The User "Admin

    BLUEPIRAT SERIES | CAMERA USER GUIDE/ page 39 of 93 Creating the user “admin” For communicating with the blue data logger a special user is needed with administrator rights. Click [Setup]  [Basic Setup]  [1 Users]  [Add…]. Figure 7.6: Add a new user A new window is opened.

  • Page 40: Setting Date And Time

    BLUEPIRAT SERIES | CAMERA USER GUIDE/ page 40 of 93 Setting date and time Change to the entry [Basic Setup]  [3 Date & Time]. Choose the <Time mode> (o) Set man- ually. Set up date and time. Confirm the settings with [Save].
  • Page 41 BLUEPIRAT SERIES | CAMERA USER GUIDE/ page 41 of 93 Figure 7.9: Include date and time in the video stream The setup for in the video image embedded timestamps is finished. Note: In case that the video is stuttering or has breaks, please reduce the preset <Maximum...

  • Page 42: Ip Configuration

    BLUEPIRAT SERIES | CAMERA USER GUIDE/ page 42 of 93 IP configuration Change to the entry [Basic Setup]  [2 TCP/IP]. Choose the <IPv4 Address Configuration> (o) Use the following IP address. Type in these data: IP address: 192.168.1.90 Subnet mask: 255.255.255.0...

  • Page 43: Resetting Configuration

    BLUEPIRAT SERIES | CAMERA USER GUIDE/ page 43 of 93 For reconnecting you have to change your computers IP address to 192.168.1.80. Then type in your browser the new IP address of the network camera, to access the configuration again.

  • Page 44: Configuring The Network Camera Axis 207/210/211

    BLUEPIRAT SERIES | CAMERA USER GUIDE/ page 44 of 93 8 Configuring the network camera AXIS 207/210/211 Warning: The camera must have installed the firmware version 4.40. If there is another firmware version installed it is recommended to install the 4.40.

  • Page 45: Installing The Camera Template

    BLUEPIRAT SERIES | CAMERA USER GUIDE/ page 45 of 93 8.2.1 Installing the camera template The template “BLUEPIRAT_Kamera_AXIS-ConfigTemplate_vX.X.cmt” configures your camera automatically. The download file is available in our ServiceCenter at [BLUEPIRAT]  [Doku- mentations] under the manual of the camera connection.
  • Page 46 BLUEPIRAT SERIES | CAMERA USER GUIDE/ page 46 of 93 17. Click [OK] to confirm the template. A dialog opens. 18. Check the configuration process. Figure 8.3: Result of the configuration process Index...

  • Page 47: Creating The User "Admin

    BLUEPIRAT SERIES | CAMERA USER GUIDE/ page 47 of 93 8.2.2 Creating the user “admin” For communicating with the data logger a special user is needed with administrator rights. 19. Click the configured AXIS camera with the right mouse button.

  • Page 48: Manual Configuration

    BLUEPIRAT SERIES | CAMERA USER GUIDE/ page 48 of 93 Manual configuration 22. Reset camera to the factory default settings. 23. Connect camera with the PC / laptop via an Ethernet cable. 24. Open browser. 25. Type in the preset IP address of the network camera: 192.168.0.90.

  • Page 49: Ip Configuration

    BLUEPIRAT SERIES | CAMERA USER GUIDE/ page 49 of 93 8.3.2 IP configuration Change to the entry [Basic Configuration]  [2. TCP/IP]. Choose the <IPv4 Address Configu- ration> (o) Use the following IP address. Type in these data: IP address: 192.168.1.90...

  • Page 50: Creating The User "Admin

    BLUEPIRAT SERIES | CAMERA USER GUIDE/ page 50 of 93 Figure 8.9: Hint 2 For reconnecting you have to change your computers IP address to 192.168.1.80. Then type in your browser the new IP address of the network camera, to access the configuration again.
  • Page 51 BLUEPIRAT SERIES | CAMERA USER GUIDE/ page 51 of 93 Figure 8.10: Enable anonymous viewer login Index...

  • Page 52: Setting Date And Time

    BLUEPIRAT SERIES | CAMERA USER GUIDE/ page 52 of 93 8.3.4 Setting date and time Change to the entry [Basic Configuration]  [3. Date & Time]. Choose the <Time mode> (o) Set manually. Set up date and time. Confirm the settings with [Save].
  • Page 53 BLUEPIRAT SERIES | CAMERA USER GUIDE/ page 53 of 93 Figure 8.12: Include date and time in the video stream The setup for in the video image embedded timestamps is finished. Note: In case that the video is stuttering or has breaks, please reduce the preset <Maximum frame rate>.

  • Page 54: Setting Mpeg-4

    BLUEPIRAT SERIES | CAMERA USER GUIDE/ page 54 of 93 8.3.5 Setting MPEG-4 Change to the entry [Video & Image]  [Advanced]  [MPEG-4]. Change <Length> to 32. Choose the <Maximum bit rate> (o) Limited to … kbit/s. Type in “3000”.

  • Page 55: Configuring The Video Encoder Axis Q7404

    BLUEPIRAT SERIES | CAMERA USER GUIDE/ page 55 of 93 9 Configuring the Video Encoder AXIS Q7404 Connecting the Video Encoder AXIS Q7404 Connect the required cameras with the Video Encoder. The BNC connectors of the Video En- coder are numbered. Always start with the first connector.

  • Page 56: Access To The Video Encoder Axis Q7404

    BLUEPIRAT SERIES | CAMERA USER GUIDE/ page 56 of 93 Access to the Video Encoder AXIS Q7404 Open your browser and type in the preset IP address of the video server: 192.168.0.90. Choose your password and type it in. This password will be needed later.
  • Page 57 BLUEPIRAT SERIES | CAMERA USER GUIDE/ page 57 of 93 Figure 9.5: Selecting a language In some cases a browser add-on is necessary to display the video stream. Now you should see the live stream of the connected network camera number 1.

  • Page 58: Creating The User "Admin

    BLUEPIRAT SERIES | CAMERA USER GUIDE/ page 58 of 93 Creating the user “admin” For communicating with the data logger a special user is needed with administrator rights.  [Basic Setup]  [1 Users]  [Add…] (3). Click [Setup] Figure 9.7: Adding a new user A new window opens.

  • Page 59: Setting Date And Time

    BLUEPIRAT SERIES | CAMERA USER GUIDE/ page 59 of 93 Setting date and time Change to the entry [Basic Setup]  [3. Date & Time] (9). Choose the <Time mode> (o) Set manually (10). Set up date and time. Confirm the settings with [Save] (11).
  • Page 60 BLUEPIRAT SERIES | CAMERA USER GUIDE/ page 60 of 93 Figure 9.9: Including date and time in the video stream The setup for in the video image embedded timestamps is finished. Note: In case that the video is stuttering or has breaks, please reduce the preset <Maximum frame rate>.

  • Page 61: Ip Configuration

    BLUEPIRAT SERIES | CAMERA USER GUIDE/ page 61 of 93 IP configuration Change to the entry [Basic Setup]  [2. TCP/IP] (12). Choose the <IPv4 Address Configura- tion> (o) Use the following IP address (13). Type in these data (14): IP address: 192.168.1.90...
  • Page 62 BLUEPIRAT SERIES | CAMERA USER GUIDE/ page 62 of 93 For reconnecting you have to change your computers IP address to 192.168.1.80. Then type in your browser the new IP address of the network camera, to access the configuration again.

  • Page 63: Configuring The Video Encoder Axis P7214

    BLUEPIRAT SERIES | CAMERA USER GUIDE/ page 63 of 93 10 Configuring the Video Encoder AXIS P7214 10.1 Connecting the Video Encoder AXIS P7214 Connect the required cameras with the Video Encoder. The BNC connectors of the Video En- coder are numbered. Always start with the first connector.

  • Page 64: Access To The Video Encoder Axis P7214

    BLUEPIRAT SERIES | CAMERA USER GUIDE/ page 64 of 93 10.2 Access to the Video Encoder AXIS P7214 Open your browser and type in the preset IP address of the video server: 192.168.0.90. Choose your password and type it in. This password will be needed later.
  • Page 65 BLUEPIRAT SERIES | CAMERA USER GUIDE/ page 65 of 93 Depending on the installed language at the video server you can download a new language file or select the existing. Figure 10.5: Select a language In some cases a browser add-on is necessary to display the video stream.

  • Page 66: Creating The User "Admin

    BLUEPIRAT SERIES | CAMERA USER GUIDE/ page 66 of 93 Creating the user “admin” 10.3 For communicating with the data logger a special user is needed with administrator rights.  [Basic Setup]  [1. Users]  [Add…] (3). Click [Setup] Figure 10.7: Adding a new user...

  • Page 67: Setting Date And Time

    BLUEPIRAT SERIES | CAMERA USER GUIDE/ page 67 of 93 10.4 Setting date and time Change to the entry [Basic Setup]  [3. Date & Time] (9). Choose the <Time mode> (o) Set manually (10). Set up date and time. Confirm the settings with [Save] (11).
  • Page 68 BLUEPIRAT SERIES | CAMERA USER GUIDE/ page 68 of 93 Figure 10.10: Include date and time in the video stream The setup for in the video image embedded timestamps is finished. Note: In case that the video is stuttering or has breaks, please reduce the preset <Maximum frame rate>.

  • Page 69: Ip Configuration

    BLUEPIRAT SERIES | CAMERA USER GUIDE/ page 69 of 93 10.5 IP configuration Change to the entry [Basic Setup]  [2 TCP/IP] (3). Choose the <IPv4 Address Configuration> (o) Use the following IP address (4). Type in these data (5): IP address: 192.168.1.90...
  • Page 70 BLUEPIRAT SERIES | CAMERA USER GUIDE/ page 70 of 93 Figure 10.12: Hint For reconnecting you have to change your computers IP address to 192.168.1.80. Then type in your browser the new IP address of the network camera, to access the configuration again.

  • Page 71: Save And Restore The Video Encoder Settings

    BLUEPIRAT SERIES | CAMERA USER GUIDE/ page 71 of 93 11 Save and restore the Video Encoder settings To save all settings of the AXIS video server you can use the program “AXIS Camera Manage- ment”, which can be downloaded on the website of AXIS (registration required).
  • Page 72 BLUEPIRAT SERIES | CAMERA USER GUIDE/ page 72 of 93 Figure 11.3: Adding devices step 2 Figure 11.4: Adding devices step 3 Figure 11.5: Device added To save the current settings please right click your device. In the shortcut menu select [Parame-...
  • Page 73 BLUEPIRAT SERIES | CAMERA USER GUIDE/ page 73 of 93 Figure 11.6: Creating Parameter File The program reads the configuration from the video server. Activate the checkbox Select / De- select all and then click [Save] to save the configuration to your local system.

  • Page 74: Resetting The Video Encoder Axis Q7404 / P7214

    BLUEPIRAT SERIES | CAMERA USER GUIDE/ page 74 of 93 12 Resetting the Video Encoder AXIS Q7404 / P7214 If something is configured incorrectly in the camera or the password is lost, it is important to re- set the video server for a new configuration. This will reset all parameters in all four video chan- nels (including all IP addresses) to the factory default settings.

  • Page 75: Connecting Video Equipment To The Data Logger

    BLUEPIRAT SERIES | CAMERA USER GUIDE/ page 75 of 93 13 Connecting video equipment to the data logger Depending on the logger model you have several ways to connect the network camera or Video Encoder to the logger. BLUEPIRAT Mini: It is possible to use one of the front Ethernet ports (ETH #1 / TSL or ETH #2 / TSL) or one of the back ports (ETH #3 or ETH #4).

  • Page 76: Configuring The Data Logger

    BLUEPIRAT SERIES | CAMERA USER GUIDE/ page 76 of 93 14 Configuring the data logger 14.1 General settings The logger should be configured as DHCP server, if it is not already configured accordingly (de- fault value). Therefore click on the application [Open configuration] in the System Client.
  • Page 77 BLUEPIRAT SERIES | CAMERA USER GUIDE/ page 77 of 93 This has important implications when using the camera function since Ethernet is required. If you activated the automatic standby, no further channels are connected or they are inactive, the logger shuts down and enters standby mode according to the lower time indication despite the video recording.

  • Page 78: Camera Settings

    BLUEPIRAT SERIES | CAMERA USER GUIDE/ page 78 of 93 14.2 Camera settings 14.2.1 Camera | General settings Click on the application [Open configuration] in the System Client. Expand the folder [Cam- era] in the window to the right and click on [General settings].

  • Page 79: Encrypting Video Data

    BLUEPIRAT SERIES | CAMERA USER GUIDE/ page 79 of 93 Figure 14.5: Camera => General settings To record video blocks of certain length, type in your desired value in seconds at <Video block length>. The field <Synchronisation of the camera time with the data logger time every [ ] s> al- lows defining his time range.

  • Page 80: Configuring The Cameras

    BLUEPIRAT SERIES | CAMERA USER GUIDE/ page 80 of 93 Note: Quad channel means that up to 4 video streams are recorded in one window. Attention: With the setting Quad-View, the same maximum frame rate must be set for all cameras! You can find this setting in the camera configuration under Axis Setup =>...
  • Page 81 BLUEPIRAT SERIES | CAMERA USER GUIDE/ page 81 of 93 Figure 14.7: Configuring the cameras If you have selected under [General], make the same changes for all connected cameras with the following IP addresses: Camera 1 Camera 2 Camera 3...

  • Page 82: Front Display Of Bluepirat2

    BLUEPIRAT SERIES | CAMERA USER GUIDE/ page 82 of 93 14.3 Front display of BLUEPIRAT2 With the [OFF / Esc] button at the front of the data logger the main window appears on the dis- play. By switching the rotary knob you can change the displayed interfaces. There you can see the configuration of the four cameras, represented by “VID”...

  • Page 83: Downloading Video Data

    (see chapter 16) Download and conversion of data is explained in detail in the System Client User Guide. This manual you can find in the ServiceCenter of MAGNA Telemotive GmbH or directly under this link: https://sc.telemotive.de/4/uploads/media/TelemotiveSystemClient_UserManual.pdf While all of the other trace files are recorded in the Telemotive format from the logger, video sig- nals are directly provided as MPEG4 stream from the camera and saved as it is on the logger.

  • Page 84: Converting Video Data

    BLUEPIRAT SERIES | CAMERA USER GUIDE/ page 84 of 93 16 Converting video data The System Client additionally allows to save data from the logger in a requested format on a PC or external storage device. Because video signals are directly provided as MPEG4 stream there is no direct conversion possible.

  • Page 85: Watching Videos

    BLUEPIRAT SERIES | CAMERA USER GUIDE/ page 85 of 93 17 Watching videos The .mpeg4 video files cannot be watched with the data logger. They can be used only if they have been downloaded or converted and saved to a computers disk first.

  • Page 86: Axis Ip Utility

    BLUEPIRAT SERIES | CAMERA USER GUIDE/ page 86 of 93 18 Axis IP Utility is a small tool that you can download from the Axis Hompepage over the following link: http://www.axis.com/global/en/support/downloads/axis-ip-utility Figure 18.1: Axis IP Utility AXIS IP Utility helps you set the IP address of an Axis network video product. Axis devices on the network are automatically discovered and displayed.

  • Page 87: Abbreviations

    BLUEPIRAT SERIES | CAMERA USER GUIDE/ page 87 of 93 19 Abbreviations Kürzel / abbreviation Bedeutung / meaning blue PiraT rocessing nformation ecording nalyzing iraT => BLUEPIRAT iraT => BLUEPIRAT2 bP2 5E iraT 5E => BLUEPIRAT2 5E bPMini iraT Mini => BLUEPIRAT Mini...
  • Page 88 BLUEPIRAT SERIES | CAMERA USER GUIDE/ page 88 of 93 Telemotive Trace blue PiraT P acketformat bPSA blue PiraT System Access bPSL blue PiraT S ystem User Datagram Protocol niversal erial niversal ime, oordinated Wireless Fidelity Wi-Fi Wireless Local Area Network...

  • Page 89: List Of Figures

    BLUEPIRAT SERIES | CAMERA USER GUIDE/ page 89 of 93 20 List of figures Figure 4.1: links to the manuals in the System Client ..............9 Figure 5.1 Connecting the network camera with a PC/ laptop........... 12 Figure 5.2 Setting a static IP address ..................12 Figure 5.3 Initial login mask ......................
  • Page 90 BLUEPIRAT SERIES | CAMERA USER GUIDE/ page 90 of 93 Figure 7.4: Configure the power line frequency ................ 38 Figure 7.5: Picture of a connected network camera ..............38 Figure 7.6: Add a new user ...................... 39 Figure 7.7: Enable anonymous viewer login ................39 Figure 7.8: Set date and time manually ...................
  • Page 91 BLUEPIRAT SERIES | CAMERA USER GUIDE/ page 91 of 93 Figure 14.4: Setting the time range around a marker ..............78 Figure 14.5: Camera => General settings ................. 79 Figure 14.6: Setting an IP address ................... 80 Figure 14.7: Configuring the cameras ..................81 Figure14.8: Display: VID...

  • Page 92: List Of Tables

    BLUEPIRAT SERIES | CAMERA USER GUIDE/ page 92 of 93 21 List of tables Table 4.1: Additional features by optional licenses ..............10 Table 19.1: Abbreviations ......................88 Index...

  • Page 93: Contact

    BLUEPIRAT SERIES | CAMERA USER GUIDE/ page 93 of 93 22 Contact MAGNA Telemotive GmbH Office München Frankfurter Ring 115a 80807 München / Germany Tel.: +49 89 357186-0 Fax.: +49 89 357186-520 E-Mail: TMO.info@magna.com Web: https://telemotive.magna.com Sales Tel.: +49 89 357186-550 Fax.:...

This manual is also suitable for:

Axis p12 seriesAxis f seriesAxis f54Axis f41Axis f44Axis 211 ... Show all

Table of Contents