Configuring The Video Encoder Axis P7214; Connecting The Video Encoder Axis P7214 - Magna BLUEPIRAT Series Camera User Manual

BLUEPIRAT SERIES | CAMERA USER GUIDE/
page 63 of 93

10 Configuring the Video Encoder AXIS P7214

10.1

Connecting the Video Encoder AXIS P7214

Connect the required cameras with the Video Encoder. The BNC connectors of the Video En-
coder are numbered. Always start with the first connector.
Connect the power supply to the Video Encoder. Connect your PC or laptop via Ethernet cable
to the Video Encoder. Turn on the power supply. All LEDs should light green after about 60 sec-
onds.
AXIS P7214
Cameras
PC / laptop
Power supply (acc. AXIS spec.)
Figure 10.1: Connecting a Video Encoder
Change your PCs IP configuration. Use static IP address with the following settings:
Figure 10.2: Setting a static IP address
Index