Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Magna BLUEPIRAT2
Summary of Contents for Magna BLUEPIRAT2
- Page 1 BLUEPIRAT2 User Manual / 30.09.2020 Version 5.0.1...
-
Page 2: Table Of Contents
4.3 Firmware Care ....................12 5 The BLUEPIRAT2 system ..............13 5.1 Accessories ....................13 5.2 Model versions of BLUEPIRAT2 / BLUEPIRAT2 5E ........14 6 Control elements at the front side ........... 15 6.1 ON / Trigger button ..................16 6.1.1 Resetting the network settings ................ - Page 3 Pin assignment of the BLUEPIRAT2 multi-function connector ......57 14.1.3 Pin assignment of the BLUEPIRAT2 5E multi-function connector ....58 14.3 Power cable for BLUEPIRAT2 5E (Art. 103 614) ..........59 14.5 Adapter cable Serial/RS232, Analog/Digital............ 60 14.5.1 Serial connector (D-Sub 26) ................61 14.7 Adapter cables for Analog/Digital ..............
- Page 4 BLUEPIRAT2 | USER MANUAL/ page 4 of 82 14.12.1 CAN/FlexRay (D-Sub 44) (25M24C8LFR only) ..........66 14.13 MOST25 / 150 Connector (optical) ............68 14.14 MOST150 cPhy Connector (electrical) ............. 68 14.15 Adapter cable for Remote Control Voice (RCV) ........69 14.15.1 Connection to Remote Control Voice ...............
-
Page 5: License Agreement
Licensor is and remains the owner of all titles, rights and interests in the soft- ware. The software is a copyright property of the MAGNA Telemotive GmbH. The program or parts of it may not be further licensed to third parts, rented, sold or be further marketed in any form without explicit written ap- proval by MAGNA Telemotive GmbH. -
Page 6: Product Liability
BLUEPIRAT2 | USER MANUAL/ page 6 of 82 2 PRODUCT LIABILITY Terms and Conditions of Sale and Delivery The General Terms and Conditions of Sale and Delivery of MAGNA Telemotive GmbH can be found on our website (https://telemotive.magna.com) under imprint. Important operating instructions... -
Page 7: Overview
MAGNA Telemotive GmbH, called BLUEPIRAT2, as well as for the newest, for Ethernet recording optimized generation, the BLUEPIRAT2 5E. In all functions which are equal to both devices we use the name BLUEPIRAT2 in this user guide. If there are differences in the handling they are mentioned separately. -
Page 8: System Requirements
System Link. BLUEPIRAT2 The BLUEPIRAT2 is our top-class all-in-one data logger. Seven models cover a wide range of interfaces. (Device is EOL) BLUEPIRAT2 5E Additionally, the BLUEPIRAT2 5E offers improved power management and power backup, five integrated Ethernet ports and super-fast start-up behavior. - Page 9 BLUEPIRAT2 | USER MANUAL/ page 9 of 82 License For some additional features an installed license is required. Settings for licensed features can be performed with a valid license only. If you need a license for your logger, please contact our sales department (please find the ad-...
-
Page 10: Further Manuals
User manual for Remote Control Touch https://sc.telemotive.de/4/uploads/media/RCTouch_UserGuide.pdf User manual for BLUEPIRAT Power Backup https://sc.telemotive.de/4/uploads/media/BLUEPIRAT_Power_Backup_UserManual.pdf User manual for BLUEPIRAT2 / BLUEPIRAT2 5E https://sc.telemotive.de/4/uploads/media/BLUEPIRAT2_UserManual.pdf User manual for BLUEPIRAT Remote https://sc.telemotive.de/4/uploads/media/BLUEPIRAT_Remote_UserGuide.pdf For having an easy access if necessary, the most important manuals are linked in the cli- ent under the menu item [Help] and are reachable easily from there. -
Page 11: Additional Features By Optional Licenses
MOST150 synchronous/isochronous data MLBevo / QXDM The license Connected-Gateway MLBevo enables the recording of data of the ATOP control unit MLBevo via USB to the Magna Telemotive data log- ger and convert these data with the System Client. (from FW 02.03.01) Additional this license allows to log Qualcomm QXDM logs via USB (from FW 03.06.XX) -
Page 12: Firmware Care
BLUEPIRAT2 | USER MANUAL/ page 12 of 82 Firmware Care MAGNA Telemotive GmbH invests a great amount in the further development of its products. For this we regularly provide new functions and enhancements via firmware and client releases. Basic conditions As part of the "... -
Page 13: The Bluepirat2 System
The data logger can be mounted in a vehicle and due to his large storage capacity of the hard drive of currently 100 GB or higher, the BLUEPIRAT2 is able to support extensive test runs. Af- ter the data has been gathered it has to be downloaded via Ethernet. For the download and the conversion of the logging data the System Client is available. -
Page 14: Model Versions Of Bluepirat2 / Bluepirat2 5E
14 of 82 Model versions of BLUEPIRAT2 / BLUEPIRAT2 5E The BLUEPIRAT2 supports a lot of bus systems which can be recorded by the data logger. This table shows which model of the BLUEPIRAT2 supports which number of interfaces and chan- nels. -
Page 15: Control Elements At The Front Side
BLUEPIRAT2 | USER MANUAL/ page 15 of 82 6 Control elements at the front side The next section describes the usage of the controls and connectors of the BLUEPIRAT2 / 5E. Figure 6.1: Front side of the BLUEPIRAT2 Attention: If you have ordered an external antenna, e.g., for GPS, the connector has to be bolt only by hand NOT with any tools. -
Page 16: On / Trigger Button
4 RJ45 connectors. ON / Trigger button The [ON / Trigger] button is used to switch on the BLUEPIRAT2 if the data logger is connected to the power and currently in sleep mode. During operation, interesting points in time can be designated by the [ON / Trigger] button. -
Page 17: Status Leds
BLUEPIRAT2 | USER MANUAL/ page 17 of 82 Status LEDs The BLUEPIRAT2 has four LEDs on his front side: Active, Memory and Error to the right side from the display and CFActive on the right side from the Compact Flash slot. Behavior... -
Page 18: Usb Storage
The USB storage has to be formatted in the FAT32 file format. You could connect USB flash drives and external hard drive up to a maximal supply current of 500 mA at BLUEPIRAT2 and 800 mA at BLUEPIRAT2 5E. External power supplies are needed only when the external HDD has a higher power consumption.. -
Page 19: Startup
BLUEPIRAT2 | USER MANUAL/ page 19 of 82 6.6.1 Startup During the Startup phase the display shows: BLUEPIRAT2 After the Startup phase is finished, the display shows the status of the most important inter- faces. For a MOST25 version the MOST25 and FlexRay will be displayed on the beginning:... -
Page 20: Info
To assume this setting, a restart is necessary. Lock Keypad If this function will be started by pressing the [menu] knob, the BLUEPIRAT2 lock its control el- ements without any confirmation and the message <Keypad locked> appears. By pressing the [OFF / Esc] button for more than 5 seconds the control elements will be un-... -
Page 21: Error Memory
After pressing the [menu] knob a verification message will be displayed. With the [OFF / Esc] button the process can be aborted, with the [menu] knob the BLUEPIRAT2 begins to erase the memory of the memory device. After completion the message <Memory card successfully erased>... -
Page 22: Install License
After pressing the [menu] knob a verification message will be displayed. With the [OFF / ESC] button the process can be aborted. With the [menu] knob the BLUEPIRAT2 begins to update his firmware. The message <Updating firmware please wait..> will be dis- played for a short time. -
Page 23: Install Configuration
After pressing the [menu] knob a verification message will be displayed. With the [OFF / ESC] button the process can be aborted. With the [menu] knob the BLUEPIRAT2 begins to install the configuration. If the installation was successful, the message <Config up- dated>... -
Page 24: Starting Bluepirat2
If you have ordered an external antenna, e.g., for GPS, the connector has to be bolt only by hand, NOT with any tools! Switch the BLUEPIRAT2 on by pressing the [ON / Trigger] button and wait until the logger is ready. The logger shows available bus ports. -
Page 25: Default Network Settings
BLUEPIRAT2 | USER MANUAL/ page 25 of 82 For switching off the BLUEPIRAT2 later please press the [OFF / Esc] button for a few seconds until the message < – – – – – Shutdown – – – – – > is displayed. -
Page 26: Terminal Ip Address
BLUEPIRAT2 | USER MANUAL/ page 26 of 82 Terminal IP address Each BLUEPIRAT has an additional, permanently set network address internally, which can be used to reach the device if the set IP address cannot be reached. This address can also be used if several devices have the same IP setting. -
Page 27: Download And Installation Of The System Client
BLUEPIRAT2 | USER MANUAL/ page 27 of 82 Download and installation of the System Client Open your internet browser and enter the IP address of the logger (Default settings: Automatic DHCP configuration for TSL with IP 192.168.0.233) and press [Enter]. -
Page 28: System Client Portable
BLUEPIRAT2 | USER MANUAL/ page 28 of 82 Follow these steps, depending on your browser: Browser Proceeding Internet Explorer Click [Save], to locally save the file on your system. Click [Accomplish]. Mozilla Firefox Click [Save file], to locally save the file on your system. -
Page 29: Interfaces At The Rear Side
BLUEPIRAT2 | USER MANUAL/ page 29 of 82 Interfaces at the rear side Figure 7.9: Rear side of the BLUEPIRAT2 with MOST150 On the various data logger types are the following connectors possible: multi function connector: This connector contains the remaining lines for power, High Speed CAN 1-12, Low Speed CAN 12-13, Remote Control Voice, LIN 1-8. - Page 30 Figure 7.10: Rear side of the data logger BLUEPIRAT2 5E MOST150 Important: In contrast to the BLUEPIRAT2 the BLUEPIRAT2 5E has a separate power supply (see at the right side below) Figure 7.11: new power supply connector with reverse polarity protection The newly delivered loggers are equipped with a reverse polarity protected power supply con- nector.
-
Page 31: Logging Data
BLUEPIRAT2 | USER MANUAL/ page 31 of 82 8 Logging data Setting markers Interesting points in time can be designated by the [ON / Trigger] button at the front panel or at the Remote Control. When pressing this button, the data logger saves the current time to hard drive. -
Page 32: Time Stamp
BLUEPIRAT2 | USER MANUAL/ page 32 of 82 Figure 8.2: Setting triggers using digital Input The setting for the <Sampling interval> is needed to debounce the external push button and be sure that only one trigger is set. The external push button can be connected to the power supply of the car and the Digital In mentioned above. -
Page 33: Standby Mode | Keep Alive | Wake Up
BLUEPIRAT2 | USER MANUAL/ page 33 of 82 Standby mode | Keep alive | wake up The table below shows, which busses or signals are monitored for keeping the logger alive and which busses or signals are able to wake up the logger. -
Page 34: Memory Space And Level
On the internal memory is enough free space to record all incoming data. BLUEPIRAT2 Memory-LED is off. BLUEPIRAT2 display On the info page the display of BLUEPIRAT2 shows the storage level and the amount of protected data. Table 8.3: Status Logger: OK 8.4.2 Status Logger: WARN Warning, which does not affect the data recording 8.4.3 Status Logger: RING... -
Page 35: Status Logger: Error
BLUEPIRAT2 | USER MANUAL/ page 35 of 82 Case 1: The ring buffer is enabled and more than 95 % full (as Status RING), in addition over 90 % of the trace files are protected. Case 2: The ring buffer is disabled and filled to more than 95 %. When ring buffer mode is disa- bled all trace files are implicitly protected. -
Page 36: Interfaces
Speed or vice versa. Each type is using different transceivers. The electrical behavior of the Low Speed and the High Speed CAN is different, hence, the Low Speed CAN port of the BLUEPIRAT2 must not be connected to a High Speed CAN bus and vice versa. -
Page 37: Recording Contents
CAN message to avoid an overload of the recorded data. 9.1.4 Sending CAN messages If the BLUEPIRAT2 sends a CAN message, it is shown twice in the trace: The first message in- dicates the transmit request of the data logger and the second message indicates the actual transmission of the message. -
Page 38: Lin
BLUEPIRAT2 | USER MANUAL/ page 38 of 82 The BLUEPIRAT2 is able to record data compliant to the LIN specification V1.3, V2.0 and V2.1. The data logger does not actively appear as a bus member. Sending LIN messages is currently not supported. -
Page 39: Serial (Rs232)
0 Volts, a logical “0” for input voltages higher than 3 Volts. FlexRay The BLUEPIRAT2 is able to record FlexRay bus data according to the FlexRay specification 2.1A. The data logger records all valid and invalid, static and dynamic frames of the two FlexRay channels, including “a”... -
Page 40: Ethernet
40 of 82 Ethernet All versions of the BLUEPIRAT2 data logger are able to log Ethernet data. All data loggers have a 1-Gbit-Ethernet port with RJ45 connector on the front. On the rear side there is a FCI con- nector which provides four 100 Mbit Ethernet interfaces. -
Page 41: Tcpserver
41 of 82 9.5.6 TCPServer The BLUEPIRAT2 can be configured as a TCP server by setting up an IP address and port number. There is an adjustable timeout. The connection will be terminated if no data arrives. This ap- pears as a message in the trace file. -
Page 42: Most25
BLUEPIRAT2 | USER MANUAL/ page 42 of 82 MOST25 The BLUEPIRAT2 MOST25 data logger is able to log messages from the MOST25 bus of the following types. Status MPR (Maximum Position Register), SBC, Light on, MOST Lock Flag Control Control Messages... -
Page 43: Ecl
BLUEPIRAT2 | USER MANUAL/ page 43 of 82 Before the logging data are saved on the internal memory, they are buffered in a ring buffer. In the case of a data rate peak, which exceeds the storage rate of the internal memory, storage of data is still possible. -
Page 44: Conversion Of Recorded Traces
BLUEPIRAT2 | USER MANUAL/ page 44 of 82 10 Conversion of recorded traces All trace data will be recorded internally in the proprietary Telemotive TMT format (*.tmt). If the recorded trace data will be downloaded and sorted, the data will be converted to an Extended TMT format (*.xtmt). -
Page 45: Service And Safety Instructions
BLUEPIRAT2 | USER MANUAL/ page 45 of 82 11 Service and safety instructions Note according to standard EN55011:2009 The device is used in an industrial environment. Due to occurring, grid-bound as well as radi- ated disturbances, it might possibly be difficult to ensure compliance with electromagnetic com- patibility in other environments. - Page 46 While operating the device in an automobile, the connected antennas must not be located out- side of the vehicle. Replacing the battery A lithium button cell is located within the device, which must be only replaced by MAGNA Telemotive GmbH. Mechanical exposure...
-
Page 47: Data Sheet
BLUEPIRAT2 | USER MANUAL/ page 47 of 82 12 Data sheet General data BLUEPIRAT2 BLUEPIRAT2 5E Nominal power supply volt- 13.8 V 13.8 V Power supply voltage 6.5 to 32 V (at system start up logger needs > 7 to 31 V at system start up 8.5 V) - Page 48 MDP filter (source address, target address) like BLUEPIRAT2 CAN recording BLUEPIRAT2 BLUEPIRAT2 5E All types Channel BLUEPIRAT2 P2 150M14C8LFR / 14C6S8L: like BLUEPIRAT2 12 High Speed, 2 Low Speed BP2 25M24C8LFR: 22 High Speed, 2 Low Speed Baud rate Up to 1000000 Baud at HS-CAN...
- Page 49 BLUEPIRAT2 | USER MANUAL/ page 49 of 82 (#1 and #2) All types Channel 1x Ubat (internal), 1x external like BLUEPIRAT2 Range of measurement 0 V to + 20 V 0 V to + 32V Resolution 7 mV 8 mV...
-
Page 50: Ce Declaration Of Conformity
BLUEPIRAT2 | USER MANUAL/ page 50 of 82 13 CE Declaration of conformity... -
Page 51: Adapter Cables & Pinning
BLUEPIRAT2 | USER MANUAL/ page 51 of 82 14 Adapter cables & pinning This section describes which adapter cables are available for the bluePiraT2 and BLUEPIRAT2 BLUEPIRAT2 BLUEPIRAT2 5E Cable Interfaces BLUEPIRAT2 / BLUEPIRAT2 5E Power, GND, Wake universal harness 12x High Speed CAN see chapter: 14.1 Universal adapter cable... - Page 52 If the application is listening to a bidirectional serial communica- tion of two devices, two serial ports of the BLUEPIRAT2 have to be used. The “Tx” lines must not be connected in this case.
- Page 53 BLUEPIRAT2 | USER MANUAL/ page 53 of 82 Device 1 RS232 #1 Rx RS232 #1 Tx blue PiraT RS232 #2 Rx RS232 #2 Tx Device 2 Figure 14.7: Listening to a bidi- rectional serial communication Serial connector (D-Sub 26) BLUEPIRAT2 / BLUEPIRAT2 5E...
- Page 54 BLUEPIRAT2 | USER MANUAL/ page 54 of 82 for BLUEPIRAT2 150M14C8LFR/ 150M5E14C). Figure 14.11: Adapter cables for FlexRay FlexRay connector BLUEPIRAT2 / BLUEPIRAT2 5E 10x High Speed CAN CAN/FlexRay extension harness 2x FlexRay a see chapter: 2x FlexRay b 14.12 Adapter cables for CAN/FlexRay...
- Page 55 BLUEPIRAT2 | USER MANUAL/ page 55 of 82 Warning: Clamp 31 should be the only ground connection between the data logger and connected devices. Connecting signal ground lines is limited to special cases in which one can guarantee that ground loops cannot occur.
-
Page 56: Universal Adapter Cable
Figure 14.4: Connecting the BLUEPIRAT2 via the universal adapter cable When the universal cable set is used at a BLUEPIRAT2 5E +12V Power and Ground are needed for an optional Remote Control Voice only! 14.1.1... -
Page 57: Pin Assignment Of The Bluepirat2 Multi-Function Connector
KL 31 Please combine pins 52, 53, 54 for the KL 31 ---- KL 31 Please combine pins 52, 53, 54 for the KL 31 banana plug black ---- Table 14.3: Pin assignment of the BLUEPIRAT2 multi-function connector... -
Page 58: Pin Assignment Of The Bluepirat2 5E Multi-Function Connector
LIN #06 DSUB-9 / male LSCAN_L_RC CAN RemoteControl LUMBERG KV81-8 LSCAN_H_RC CAN RemoteControl LUMBERG KV81-8 Not connected (rfu) ----------------------- ---- Not connected (rfu) ----------------------- ---- Not connected (rfu) ----------------------- ---- Table 14.4: Pin assignment of the BLUEPIRAT2 5E multi-function connector... -
Page 59: Power Cable For Bluepirat2 5E (Art. 103 614)
SUB-D 3- Signal Type KL 31 KL 31 banana plug black power supply (-) Not connected KL 30 KL 30 banana plug power supply (+) & -[Fuse 15 A]- Table 14.6: Pin assignment of the BLUEPIRAT2 5E – power harness Index... -
Page 60: Adapter Cable Serial/Rs232, Analog/Digital
Figure 14.6: RS232/digital/analog adapter cable Note: The BLUEPIRAT2 actively sends data on the “Tx” line if a protocol for the serial port is configured. The “Tx” line must only be connected to special devices that support those protocols. If the application is listening to a bidirectional serial communication of two de- vices, two serial ports of the BLUEPIRAT2 have to be used. -
Page 61: Serial Connector (D-Sub 26)
BLUEPIRAT2 | USER MANUAL/ page 61 of 82 14.5.1 Serial connector (D-Sub 26) The 26-pin-D-Sub-connector combines RS232 digital and analog interfaces. Name Type Manufacturer-Nr. Manufacturer DSUB 26pin Connector HD 26F (Reichelt) Shell 1-1478762-5 Tyco Table 14.7: D-Sub 26pin Index @ Logger... -
Page 62: Adapter Cables For Analog/Digital
BLUEPIRAT2 | USER MANUAL/ page 62 of 82 14.7 Adapter cables for Analog/Digital The following figure shows the adapter cables for ECL, 4x digital IN, 8x analog IN and 2x digital OUT. Figure 14.8: Adapter cables for digital/analog This adapter cable is only available for the logger types 150M14C8LFR and 25M24C8LFR as well as for 25M5E24C and 150M5E14C. -
Page 63: Ethernet Kit For Bluepirat2
The following figure shows the Ethernet box with four interfaces. This would be connected with a FCI-cable to the BLUEPIRAT2. This kit is available only for BLUEPIRAT2 because BLUEPIRAT2 5E has an integrated 4-port switch. Figure 14.9: Ethernet kit for BLUEPIRAT2 14.8.1... -
Page 64: Rj45 Ethernet Connector
BLUEPIRAT2 | USER MANUAL/ page 64 of 82 Index @ Logger @ Vehicle Interface comment / depiction / signal name Signal Type 26pin ETH1 Tx- RJ45 ETH1 Tx+ RJ45 ---- ETH1 Rx+ RJ45 ETH1 RX- RJ45 ETH2 Tx- RJ45 ETH2 Tx+... -
Page 65: Adapter Cable Flexray
BLUEPIRAT2 | USER MANUAL/ page 65 of 82 14.11 Adapter cable FlexRay The following figure shows the adapter cables for FlexRay (only for BLUEPIRAT2 150M14C8LFR/ 150M5E14C). Figure 14.11: Adapter cables for FlexRay 14.11.1 FlexRay connector Name Type Manufacturer-Nr. Manufacturer Ribbon 14pin... -
Page 66: Adapter Cables For Can/Flexray
BLUEPIRAT2 | USER MANUAL/ page 66 of 82 14.12 Adapter cables for CAN/FlexRay The following figure shows the adapter cables for 10x High Speed CAN and FlexRay (only for BLUEPIRAT2 25M24C8LFR/ 25M5E24C). Figure 14.12: Adapter cables for CAN/FlexRay 14.12.1 CAN/FlexRay (D-Sub 44) (25M24C8LFR only) - Page 67 BLUEPIRAT2 | USER MANUAL/ page 67 of 82 Not connected ---------------------- ---- Not connected ---------------------- ---- Not connected ---------------------- ---- Not connected ---------------------- ---- Not connected ---------------------- ---- Not connected ---------------------- ---- Not connected ---------------------- ---- Not connected ---------------------- ----...
-
Page 68: Most25 / 150 Connector (Optical)
BLUEPIRAT2 | USER MANUAL/ page 68 of 82 14.13 MOST25 / 150 Connector (optical) Name Hersteller-Nr. Hersteller MOST25 / MOST150 Fiber Optic Connector TYCO-1355426 TYCO Table 14.17: MOST25 / MOST150 Connector (optical) Figure 14.13: MOST25 / MOST150 Connector (optical) 14.14... -
Page 69: Adapter Cable For Remote Control Voice (Rcv)
Figure 14.15: Adapter cable for Remote Control Voice (RCV) Please note: When using a BLUEPIRAT2 5E the power connector of the universal cable set has to be connected too although this device has an own power cable because this connection is needed for the RCV/RC. -
Page 70: Contacts Of The Remote Control Voice Cable
BLUEPIRAT2 | USER MANUAL/ page 70 of 82 14.15.2 Contacts of the Remote Control Voice cable These two drawings show the pinout of the Remote Control Voice cable. Figure 14.16: Pins des DIN-Steckers DIN-Steckers (Lumberg SV81-8 DIN8) Figure 14.17: Pins des gewinkelten LEMO-Steckers (FGH.1B.308.CLAD42) 14.16... -
Page 71: Support
BLUEPIRAT2 | USER MANUAL/ page 71 of 82 15 Support If problems occur with a product from Magna Telemotive GmbH, please take following steps: Read the User Manual Please check if you are using an up-to-date software ... -
Page 72: What Is Otrs
15.2.2 Needed information in a ticket If you notice any behavior with a MAGNA Telemotive GmbH product that does not correspond to the expected process, you are welcome to inform us via our ticket system. Please report only one problem per ticket and do not create collective tickets to keep a clear overview. -
Page 73: The Points In Detail
BLUEPIRAT2 | USER MANUAL/ page 73 of 82 15.2.2.2 The points in detail Observed behavior What exactly have you observed that does not match the behavior you expected or described in the manual? Exact time The most accurate possible time when an unexpected behavior was observed. -
Page 74: Sending Inquiries
BLUEPIRAT2 | USER MANUAL/ page 74 of 82 15.2.3 Sending Inquiries You can send inquiries as usual via your own email client to TMO.Productsupport@magna.com . This email arrives automatically the OTRS and generates a ticket. Furthermore you can write inquiries directly in the Open Ticket Request System (OTRS). -
Page 75: Search Function
BLUEPIRAT2 | USER MANUAL/ page 75 of 82 By clicking on the button in the main screen of the login-area a new screen opens (see image 2). With the button you can choose your desired files for the upload. The upload can be started by using the button The upload of the file will be shown in your personal login-area. -
Page 76: Sending In Defective Devices
BLUEPIRAT2 | USER MANUAL/ page 76 of 82 15.3 Sending in defective devices If your device needs to be return for repair, please complete the Service report for the device, print it out and send it with the defective device directly to Mühlhausen for repair. -
Page 77: Release Info - Informed Just In Time
Release info – informed just in time 15.4 With Magna Telemotive release info we will inform you about new firmware versions for our data loggers as soon as they are available. This allows you to keep your devices up to date with the latest state of development. -
Page 78: Abbreviations
BLUEPIRAT2 | USER MANUAL/ page 78 of 82 16 Abbreviations Kürzel / abbreviation Bedeutung / meaning blue PiraT rocessing nformation ecording nalyzing iraT => BLUEPIRAT iraT => BLUEPIRAT2 bP2 5E iraT 5E => BLUEPIRAT2 5E bPMini iraT Mini => BLUEPIRAT Mini... - Page 79 BLUEPIRAT2 | USER MANUAL/ page 79 of 82 Telemotive Trace blue PiraT P acketformat bPSA blue PiraT System Access bPSL blue PiraT S ystem User Datagram Protocol niversal erial niversal ime, oordinated Wireless Fidelity Wi-Fi Wireless Local Area Network WLAN...
-
Page 80: List Of Figures
Figure 7.8: Content of the portable client .................. 28 Figure 7.9: Rear side of the BLUEPIRAT2 with MOST150 ............29 Figure 7.10: Rear side of the data logger BLUEPIRAT2 5E MOST150 ........30 Figure 7.11: new power supply connector with reverse polarity protection........ 30 Figure 8.1: Sampling interval .................... -
Page 81: List Of Tables
Table 14.4: Pin assignment of the BLUEPIRAT2 5E multi-function connector ......58 Table 14.5: BLUEPIRAT2 5E – power harness ................ 59 Table 14.6: Pin assignment of the BLUEPIRAT2 5E – power harness ........59 Table 14.7: D-Sub 26pin ......................61 Table 14.8: Pin assignment of the Digital/Analog connector ............. -
Page 82: Contact
BLUEPIRAT2 | USER MANUAL/ page 82 of 82 19 Contact MAGNA Telemotive GmbH Office München Frankfurter Ring 115a 80807 München / Germany Tel.: +49 89 357186-0 Fax.: +49 89 357186-520 E-Mail: TMO.info@magna.com Web: www.telemotive.de Sales Tel.: +49 89 357186-550 Fax.:...
Need help?
Do you have a question about the BLUEPIRAT2 and is the answer not in the manual?
Questions and answers