Resetting Configuration - Magna BLUEPIRAT Series Camera User Manual

For reconnecting you have to change your computers IP address to 192.168.1.80. Then type in
your browser the new IP address of the network camera, to access the configuration again.
Note:
Finally, change your PCs or laptops IP configuration back to dynamic configuration.
7.6

Resetting configuration

The AXIS P-series can be set to default settings by the following steps:
5. Disconnect the connection to the power supply.
6. Press and hold the control button next to the PWR connector and
7. reconnect to the power supply.
8. Hold the control button for 15 to 30 seconds till the Stat-LED flashes yellow.
When the Stat-LED turns green the process is finished.
BLUEPIRAT SERIES | CAMERA USER GUIDE/
(http://192.168.1.90)
page 43 of 93
Index