Creating the user "admin"
5.3
For communicating with the blue data logger a special user is needed with administrator rights.
Click [Setup] [Basic Setup] [1 Users] [Add...].
Figure 5.6: Add a new user
A new window is opened.
Activate at <User Settings> the checkbox Enable anonymous viewer login (no user name or
password required). Confirm the settings with [Save].
Figure 5.7: Enable anonymous viewer login
bP2-Mini_Camera_UserGuide_V2.4.1.doc
blue PiraT2 / 5E / Mini
Camera User Guide
Name the new user "admin" and define a password. This
user and password will be needed later too.
Recommended:
User name:
Password:
Choose the <User group> (o) Administrator and click
[OK].
Datum: 16.09.2016
admin
2x8bg4
Seite 14 von 77