Resetting Configuration - Magna Telemotive blue PiraT2 User Manual

For reconnecting you have to change your computers IP address to 192.168.1.80. Then type in
your browser the new IP address of the network camera, to access the configuration again.
Note:
Finally, change your PCs or laptops IP configuration back to dynamic configuration.
5.6

Resetting configuration

The AXIS P-series can be set to default settings by the following steps:
1. Disconnect the connection to the power supply.
2. Press and hold the control button next to the PWR connector and
3. reconnect to the power supply.
4. Hold the control button for 15 to 30 seconds till the Stat-LED flashes yellow.
When the Stat-LED turns green the process is finished.
bP2-Mini_Camera_UserGuide_V2.4.1.doc
blue PiraT2 / 5E / Mini
Camera User Guide
(http://192.168.1.90)
Datum: 16.09.2016
Seite 18 von 77
Index