5.5
IP configuration
Change to the entry [Basic Setup] [2 TCP/IP]. Choose the <IPv4 Address Configuration>
(o) Use the following IP address. Type in these data:
Figure 5.10: Setting an IP address
Confirm the settings with [Save].
Note:
By changing the IP address you lose the connection to the network camera.
This also will be told to you in an information window:
Figure 5.11: popup window 1
Figure 5.12: popup window 2
bP2-Mini_Camera_UserGuide_V2.4.1.doc
blue PiraT2 / 5E / Mini
Camera User Guide
IP address:
192.168.1.90
Subnet mask:
255.255.255.0
Datum: 16.09.2016
Seite 17 von 77