Configuring The Network Camera Axis P12Xx; Connecting The Network Camera Axis P1204 / P1214 / P1224 - Magna Telemotive blue PiraT2 User Manual

5

Configuring the network camera AXIS P12xx

5.1

Connecting the network camera AXIS P1204 / P1214 / P1224

Connect the camera with the associated main unit. Connect the power supply to the main unit.
Connect your PC or laptop via Ethernet cable to the main unit. Turn on the power supply. All
LEDs should light green after about 60 seconds.
Network camera AXIS P1204 / P1214 / P1224
Change your PCs IP configuration. Use static IP address with the following settings:
Figure 5.1: Setting a static IP address
bP2-Mini_Camera_UserGuide_V2.4.1.doc
blue PiraT2 / 5E / Mini
Camera User Guide
Power supply (acc. AXIS
spec.)
Datum: 16.09.2016
Seite 11 von 77
PC / laptop