Test The Pairing Process - Salus RT520RF Full User Manual

7. Test the pairing process

It is important to place the receiver and transmitter in places where nothing interferes with the radio signal. The range of communication between the
transmitter and the receiver in an open area is up to 60m. The radio transmission is influenced by many factors that can shorten the working distance, such
as thick walls, drywall covered with aluminum foil, metal objects such as cabinets, general radio interference, etc. However, the range is sufficient for most
domestic use. It is recommended to test the radio transmission between devices before mounting the regulator on the wall. The test can be performed by
changing the set temperature, i.e. by activating or deactivating the heating.
1
Press
4
The testing process takes
up to 10 minutes.
30
2
. Using
PAIRING submenu and press
5
The red LED and the green LED on the
receiver will begin to flash.
or , navigate to
.
3
3
Using or , select TEST
and press .