Table of Contents
Advertisement
9. Test the pairing process
It is important to place the receiver and transmitter in places where nothing interferes with the radio signal. The range of communication between the
transmitter and the receiver in an open area is up to 60m. The radio transmission is influenced by many factors that can shorten the working distance, such
as thick walls, drywall covered with aluminum foil, metal objects such as cabinets, general radio interference, etc. However, the range is sufficient for most
domestic use. It is recommended to test the radio transmission between devices before mounting the regulator on the wall. The test can be performed by
changing the set temperature, i.e. by activating or deactivating the heating.
1
Press TEST / PAIRING button to check
the connection with the receiver.
4
Press TEST / PAIRING button again
to return to the main screen.
If you purchased an SPE868 or RT310TX and intend pairing with other devices in the 5x5 range, please refer to the Receiver Units manual or the
relevant manuals available at www.salus-controls.eu
2
TEST / PAIRING
1 sec
Antenna icon will display. Test mode
can take up to 9 minutes.
5
TEST / PAIRING
1 sec
SPE868 will go back to normal work
TEST / PAIRING
mode.
3
The green LED on the SPE868 smart
plug receiver will begin to flash.
19
Advertisement
Table of Contents
