Creating And Accessing Storage - Western Digital OpenFlex F3x00 Manual

Installation Guide
a. Once all the devices have been installed, refresh the browser page for the chassis's
dashboard. If the browser was closed, repeat the instructions in the
(page 12)
b. Click the Power Supplies icon, and verify that there are two PSUs listed and that their health
indicators read OK:
c. Click the Fans icon and verify that there are 10 fans listed (2 rotors per Fan Module, plus 2
PSU fans). All of their health indicators should read OK.
d. Click the Slots icon and verify that the correct number and type of devices are listed for the
correct slots. All of their health indicators should read OK.
1.7 Creating and Accessing Storage
This task provides instructions for creating storage volumes within an F3x00 and accessing that storage
over a network.
Step 1 : Open a web browser and navigate to the IP address of any device on the fabric.
Step 2 : Enter a valid username and password, and click the Login button:
procedure to return to the chassis's GUI dashboard.

1.7 Creating and Accessing Storage

Chassis Installation
1. Installation
27