Table of Contents
Advertisement
Installation Guide
Figure 23: Chassis Screw Installation
c. Verify that the Chassis is secured to the rails and does not move when pulled. If the
enclosure is not secured to the rack, remove the screws and try again.
d. Install the rack ear covers onto both of the chassis mounts:
Figure 24: Rack Ear Cover Installation
Step 3 : Find and record the MAC address of the BMC Module:
a. From the front of the rack, grasp the release handle with your forefinger on the bottom and
thumb on the top. Press the release latch downward with your thumb. The handle will eject
from the front of the module:
1. Installation
1.5 Chassis Installation
17
Advertisement
Table of Contents
