Table of Contents
Advertisement
Installation Guide
Figure 17: Enclosure Installation Space
c. From the front of the rack, insert the front pin into the front vertical rack rail. Then slide
(compress) the spring-loaded rail until the rear pins line up with the rear vertical rack rail.
Ensure that the rail is installed in the bottom portion of the 3U space.
Figure 18: Rail Spring Compression
Attention: The rack-mounted rail system that comes with the E3000 uses a
spring tensioning mechanism that allows the rails to be soft-installed without
tools. However, the spring is only strong enough to hold the rails in place, and
all T15 Torx screws must be installed for safe mounting. Never install the E3000
in a set of rails that has not been secured with these screws.
1. Installation
1.5 Chassis Installation
14
Advertisement
Table of Contents
