Table of Contents
Advertisement
Installation Guide
Figure 27: BMC Module MAC Address Label
d. If the BMC Module's release handle is latched, it must be released before reinstalling the
module. Grasp the release handle with your forefinger on the bottom and thumb on the top.
Press the release latch downward with your thumb. The handle will eject from the front of
the module:
Figure 28: BMC Module Release Handle Operation
e. Gently slide the BMC Module into the center chassis slot until the release handle lifts up
slightly, indicating that it is engaged with the chassis:
1. Installation
1.5 Chassis Installation
19
Advertisement
Table of Contents
