Table of Contents
Advertisement
1
Introduction
This document describes the installation of the HPLC-Chip/Nanospray Upgrade Kit. This
upgrade is designed for all Agilent LC/MS instruments utilizing the HPLC-Chip interface in
either the HPLC-Chip configuration or Nanospray configuration.
This document and procedure assumes that air is present in the drying gas supply. If no air is
available, the HPLC Chips will charge which appears as unstable spray on the video capture
device or black/white monitor.
Please note that this document is best viewed when printed in color.
Kit Contents
The HPLC-Chip/Nanospray Upgrade Kit includes the following items:
G1982-67000
Part Number
G1969-20148
2680-0217
G1982-20005
G1982-20006
G1946-20111
G1946-20156
G1964-20303
HPLC-Chip/Nanospray Upgrade Kit
Part Description
End Plate Screw, Gold, M3 x 0.5 x 8mm long
flat head screw
Button head screw
Contact spring
Radial Gas Diverter
T-nut
End Plate, Counter Bored Holes
Capillary Insulator
Page 4 of 33
Quantity
Part
Picture
2
1
1
1
2
1
1
18 July 2011
Advertisement
Table of Contents
