The TV switches off after 3 hours
of no commands of the remote
control
Forgotten your password
The external USB HDD does not
start.
Timeshift intermittent playback
A recording does not start
10.0 SPECIFICATIONS
Audio
Audio Output:
Tuner
System:
Channel coverage:
Connectors
1 x ANT/CABLE IN
1 x SAT IN
1 x CI+
2 x HDMI
2 x USB
1 x S/PDIF (coax.)
1x AV IN
1x Ethernet
In-built Wi-Fi
1 x headphones
General data
Android version:
Network Interfaces:
Wi-Fi radio module frequency bandwidth,
MHz:
Wi-Fi transmitter maximum output power,
mW (dBm):
Operating voltage:
Power consumption:
Power consumption in standby:
The power saving Auto standby
function is activated
Default password is 0000
The power consumption is too
high.
Too many USB devices
connected
HDD is not selected in the menu Select the recording device in
6 W + 6 W
DTV: DVB-T2, DVB-C, DVB-S2
ATV: PAL/SECAM (BG/DK/1)
AV: PAL, NTSC
DVB-T2: 174 MHz-230 MHz; 470 MHz-860 MHz
DVB-C: 50-858 MHz
DVB-S2: 950 MHz-2150 MHz
6.0
Ethernet 10/100 Mbps Full Duplex
Wi-Fi 2.4 GHz Wi-Fi 802.11 b/g/n 1T1R up to 150 Mbps
2400.0 – 2483.5
27.54 (14.40)
100 ~ 240 V AC 50/60 Hz
24": max. 36 W, typ. 19 W
32" max. 111 W, typ. 32 W
40": max. 164 W, typ. 54 W
24", 32", 40": <0.5 W
Switch off the Auto Standby/
Daydream function.
Contact your local Service
Hotline or send an email to our
support via www.strong.tv
Connect an extra power supply
adapter to your USB HDD device.
Disconnect e.g. the USB camera
the PVR settings menu.
27