Strong SRT32HA3303U User Manual page 19

DTV Manual Tuning
This option allows you to scan just one frequency for digital aerial broadcasting channels by selecting
frequency channel number.
Below in the screen you will find signal strength and quality bars for optimizing the best signals of your
terrestrial antenna.
Select frequency channel number, adjust antenna for best signal level and quality, then select Search and
press OK to start scanning
After scanning all channels on selected frequency will be updated according to scanning results.
ATV Manual Tuning
This option allows you to scan manually for analogue aerial broadcasting channels.
NOTE:
Available options for scanning:
Store To:
Channel:
Color System:
Sound System:
Select Search and press t u to start scanning in the direction of lower/upper frequencies till new
channel will be detected.
If required, select Fine Tune and press t u to manually adjust frequency for selected channel to get
better result.
Select Save and press OK to store current channel to defined position with selected parameters.
5.1.2 For Cable TV
Auto Tuning
This option make full scanning of all frequencies for cable TV channels.
Select it to start scanning all frequencies for available channels. All stored earlier channels will be deleted.
Before start scanning you could define some parameters for scanning:
Channel Order:
Search Type:
Country Settings:
DTV Manual Tuning
This option allows you to scan just one frequency for digital cable channels by entering frequency and
define symbol rate and modulation for it.
Below in the screen you will find signal strength and quality bars.
Selection of this option will switch application to ATV. To return to DTV
application please select DTV in TV input sources.
Define the number of position for selected channel.
Select channel number from the list of founded earlier channels.
Available options for this parameter: Auto, PAL, NTSC and SECAM.
Available options for this parameter: DK, I, L, M and BG.
Set LCN (Logical Channel Numbering) to activate operator defined channel
numbering or Service ID to store channels in found order. Sorting of channels
in the channel list with LCN is not possible.
Select CADTV to search and store only digital channels, ATV to search and
store only analogue channels and ATV+CADTV to search and store both type
of TV channels.
Select your Country and press OK to start scanning.
15