Update - ETC Expression Show Control System Manual

Chapter 8 Reference

Update

In Stage mode, [Update] allows you to modify or add channel levels to a re-
corded cue, cue part or group, without recording the entire stage look.
Follow these steps to use [Update] to modify a cue:
1. Press [Stage] to display Stage mode.
2. Select channels and set levels you want to add.
3. Press [Update].
4. Press [Cue] or [Group], then enter cue or group number.
Note: You need not enter the cue number if it is currently displayed on the
cue/submaster description line.
5. Press [Enter].
Example
[Chan] [1] [Thru] [5] [At] [Full] [Update] [Cue] [1] [Enter] [Rel] adds channels 1
through 5, at full intensity, to cue1.
193