Inserting Cues - ETC Expression Show Control System Manual

Chapter 4 Basic operations

Inserting cues

You may want to insert a cue between recorded cues . For example, you may
want to modify cue 1 slightly and insert it between cues 1 and 2 . You can
number cues with a one-digit decimal . Therefore, you can insert up to nine cues
between one and two (1.1, 1.2, etc.) . To modify and insert a cue, follow these
steps:
1. Press [Blind] . The PSC automatically prompts you for a cue number.
2. Enter cue number you want to modify.
3. Make modifications.
4. Press [Rec].
5. Enter cue number with a decimal to insert it between cues . If you do not
enter a new cue number, you will overwrite the previous cue.
6. Press [Enter].
Insert cue keystrokes
Key
[Blind]
[1]
[Chan] [1] [0]
[Thru] [1] [5],
and set new
levels with
fader wheel
control strip
[Rec]
[1] [.] [1]
[Enter]
Action
Displays Blind mode screen.
Displays cue 1.
Selects channels 10 through 15 and modifies levels.
Indicates you want to record cue.
Enters cue number 1.1.
Records and inserts cue 1.1 between cues 1 and 2.
43