Clock Disable - ETC Expression Show Control System Manual

138 Expression Show Control System

Clock disable

[Clock Disable] stops the PSC's internal clock. Fades in progress when you press
[Clock Disable] finish, but no subsequent SMPTE events will play back until you
press [Clock Disable] again.
Press [Clock Disable] again to resume the program.
Note: If you interrupt the internal clock with [Clock Disable], wait two minutes
and press [Clock Disable] again. The internal clock starts where you stopped it.
On the other hand, if you press [Clock Disable] to interrupt the flow of external
SMPTE time information and wait two minutes, the flow of SMPTE data to the
PSC is interrupted, but SMPTE time does not stop. Pressing [Clock Disable] a
second time reestablishes the flow of SMPTE time data and the PSC picks up
the program two minutes later.