Modifying Groups Using Update - ETC Expression Show Control System Manual

Chapter 5 Advanced techniques

Modifying groups using Update

Update allows you to modify a group in Stage mode by adding to, or modifying,
only those live channels you specifically select. Unselected live channels will not
be included in the group. The levels of channels already included in the group,
but not selected, are not affected. Follow these steps to use Update to modify a
group:
1. Create a look on stage.
2. Select the channels you want to record or modify, then set channel levels.
3. Press [Update] [Group], the desired group number, and [Enter].
85